audit: clarify legacy bootstrap evidence

AGENTS.md

@@ -1,129 +0,0 @@
-# AGENTS.md
-
-## Назначение проекта
-
-Этот репозиторий содержит аудит, архитектуру, исходный код, тесты, runtime
-evidence и документацию миграции корпоративной экосистемы Autodesk AutoCAD
-Plant 3D 2019 на Autodesk AutoCAD Plant 3D 2026.
-
-Конечная цель — функционально эквивалентная рабочая схема Plant 3D 2026:
-корпоративный Launcher, локальная доставка и активация пакетов, managed
-плагины, команды, Ribbon, Plant project integration, DataLinks, Ortho,
-аннотации, обновление, диагностика и rollback. Миграция не считается
-завершённой после успешной компиляции: необходима runtime-проверка реальных
-сценариев в Plant 3D 2026.
-
-## Связанные репозитории
-
-- основной Autodesk-репозиторий: `C:\dev\autodesk`;
-- Launcher Next: `C:\dev\launcher-next`;
-- legacy launcher (read-only): `C:\dev\launcher\git`, `C:\dev\p_serv_starter`;
-- legacy P_Rec_Annot (read-only): `C:\dev\autodesk\link\P_Rec_Annot\v1.0.4\repo`.
-
-Legacy и deployed-файлы нельзя изменять без отдельного прямого задания.
-
-## Целевая платформа и принцип миграции
-
-- Autodesk AutoCAD Plant 3D 2026, series R25.1, Windows x64, .NET 8;
-- использовать реальные Autodesk 2026 managed assemblies;
-- managed package загружается локально, не напрямую с UNC;
-- Autodesk DLL нельзя коммитить, помещать в package/fixture или публиковать.
-
-Переносится функциональное поведение, а не историческая структура файлов. Не
-воспроизводить без отдельного доказательства 20 последовательных `NETLOAD`,
-legacy LISP bootstrap, `OrthoLoader.dll`, загрузку с сети или прежние
-workaround. Предпочтительная цепочка:
-
-`Launcher Next → versioned local package → один managed entry assembly → internal dependencies → commands and Ribbon`.
-
-## Статус legacy-команд
-
-Ни одна активная команда Plant 3D 2019 не исчезает молча. Для каждой команды
-фиксируется ровно один статус: `IMPLEMENTED`, `RUNTIME_VERIFIED`,
-`REPLACED_WITH_NATIVE`, `RETIRED_APPROVED` или `BLOCKED_WITH_REASON`.
-Aliases сохраняются, пока их удаление не утверждено отдельно.
-
-## Runtime уровни
-
-`Smoke` проверяет assembly load, регистрацию команд, Plant context, Ribbon,
-отсутствие необработанных исключений и отсутствие записи в DWG.
-
-`DryRun` проверяет реальные Plant data, Ortho/sheet/view definitions, DataLinks,
-Plant objects, детерминированный план и отсутствие записи в DWG/project DB.
-
-`Apply` разрешается только отдельным явным заданием: write guard, ограниченная
-DWG transaction, тестовая копия проекта, baseline, rollback/UNDO, duplicate
-protection и runtime evidence обязательны. Apply нельзя включать только
-локальной конфигурацией.
-
-## Runtime важнее предположений
-
-Build и unit tests не доказывают Autodesk integration. Для
-`RUNTIME_VERIFIED` необходимы фактические результаты: команда, module path,
-DBMOD, Ribbon, DataLinks, Ortho status, telemetry и состояние файлов после
-закрытия. Не выдумывать UI evidence: использовать `null`, `NOT VERIFIED` или
-`BLOCKED WITH REASON`.
-
-На тестовой машине реальный Plant 3D запуск разрешён, если он входит в задачу
-и есть test branch, локальный fixture, пройденные build/tests, rollback и нет
-production deploy. Не создавать искусственный review-gate перед Process.Start.
-Остановка допустима лишь после завершения доступной части работы и при
-конкретном внешнем blocker: установка, ОС, права, Autodesk runtime, fixture или
-необходимость production-данных.
-
-## Test fixtures и отсутствие записи
-
-Fixtures создаются вне Git, например `<TEST_FIXTURE_ROOT>`. Ortho fixture —
-настоящий Plant project с Pipe, DataLinks row, line group, Ortho drawing,
-Ortho viewport и source-model connection; обычный AutoCAD viewport не годится.
-Production DWG/project использовать нельзя без прямого разрешения.
-
-Нельзя коммитить DWG, DCF, Project.xml с runtime-data, project DB, Ortho
-generated files или реальные engineering values.
-
-Для Smoke/DryRun проверять DBMOD до/после, SHA-256 содержательных project
-files, отсутствие непредусмотренных transactions/DCF/project-metadata writes.
-`LastWriteTime` недостаточен. Отделять служебные Plant cache/session files от
-содержательных данных.
-
-## Ribbon, механика и evidence
-
-Ribbon — часть продукта: проверять tab, panel, button, command binding, stable
-IDs, отсутствие дубликатов при документах/workspace/reinitialization. Команда
-может быть отдельно рабочей, но plugin slice не завершён без Ribbon evidence
-или отдельного UI defect.
-
-Документировать каждую runtime-цепочку: component/project/class/method,
-input/output, Autodesk transaction mode, writes, telemetry, failure code и
-rollback action. Документация соответствует фактическому коду.
-
-Evidence содержит только проверенные значения. Не добавлять username, permit,
-полный environment, real project paths/line numbers/ObjectId/RowId/properties,
-полные logs, local manifest или startup scripts. Путь fixture заменять на
-`<TEST_FIXTURE_ROOT>`.
-
-## Warnings и Git
-
-Известный `MSB3277` WindowsBase 4.0.0.0/8.0.0.0 допустим только при полном
-совпадении с ранее зафиксированным warning. Новые warnings исследовать; не
-подавлять `NoWarn` без причины.
-
-Запрещены force push, amend/rebase опубликованной истории, push binaries,
-изменение неизвестного remote и production deployment из test branch. Перед
-commit выполнять:
-
-```powershell
-git diff --check
-git status --short
-git diff --cached --check
-```
-
-Не смешивать Launcher defect, plugin defect, runtime evidence и unrelated
-formatting в одном commit.
-
-## Definition of Done
-
-Срез завершён, когда реализованы код, build/tests, валидный package и требуемый
-runtime-сценарий; записаны фактические результаты; выполнен rollback; fixture и
-production изолированы; механика документирована; ветка опубликована обычным
-push.

Plant3D2026/P_Rec_Annot/AGENTS.md

@@ -1,79 +0,0 @@
-# AGENTS.md — P_Rec_Annot
-
-## Назначение и package
-
-`P_Rec_Annot` — приоритетный Plant 3D 2026 plugin для чтения, планирования и
-последующего создания Ortho-аннотаций; это перенос активного legacy поведения
-Plant 3D 2019 на .NET 8/Plant 3D 2026.
-
-Единственная assembly для `NETLOAD` — `PRecAnnot.Plant3D2026.dll`.
-`PRecAnnot.*.dll` — internal managed dependencies, их нельзя NETLOAD по одной.
-Использовать Autodesk 2026 references; Autodesk DLL не включать в bundle.
-
-## Commands и context
-
-Поддерживаемые команды: `PHP_REC_ANNOT`, `PXP-AAV`, `PXP-OA`. Все
-регистрируются реальным Autodesk API, работают в Smoke/DryRun, не изменяют DWG
-в этих режимах и создают одно usage event на явный вызов.
-
-Project status: `NotFound`, `FoundWithName`, `FoundWithoutDisplayName`,
-`Ambiguous`, `Failed`. Никогда не выводить `проект '' найден`; для пустого
-display name: `Plant 3D-проект открыт; отображаемое имя не определено.`
-Diagnostic code: `PLANT_PROJECT_DISPLAY_NAME_EMPTY`.
-
-Drawing states: `Ortho`, `NotOrtho`, `Ambiguous`, `Failed`. Обычный DWG не
-классифицируется как Ortho; для реального Ortho применять Autodesk API и
-`OrthoDocUtils.IsValidOrthoDrawing`.
-
-## DryRun и determinism
-
-Pipeline: `Plant context → Ortho detection → sheet/view definitions → viewport
-snapshots → DataLinks → Plant properties → independent DTO → deterministic
-AnnotationPlan → diagnostics → no write`.
-
-Autodesk objects, transactions и database handles остаются в adapter layer;
-Core/Application используют только независимые DTO. На неизменном fixture
-повторный DryRun обязан давать тот же PlanId, counts, порядок операций и warning
-codes, без side effects. PlanId не включает время, GUID, absolute path,
-нестабильный ObjectId или пользовательские данные.
-
-## Write guard, Ribbon, tests
-
-Все writes проходят централизованный write guard; в Smoke/DryRun он всегда
-запрещает изменения. Apply не обходится через command handler/adapter.
-
-Ожидаемый Ribbon путь: `Промхимпроект → Аннотации → Аннотировать`. Требуются
-stable IDs, отсутствие дублей, binding к `PHP_REC_ANNOT`, устойчивость к
-документам/workspace и корректный Terminate.
-
-Unit tests не требуют Autodesk runtime. Runtime evidence отдельно фиксирует
-initialization, commands, context, Ortho, DataLinks, plan, Ribbon, DBMOD,
-telemetry и shutdown.
-
-Bundle содержит только фактический runtime dependency graph и никогда не
-содержит Autodesk DLL, PDB, test assemblies, legacy 2019 assemblies, bin/obj
-или production configuration.
-
-Fixture: local Plant 3D 2026 project вне Git с настоящей Pipe, synthetic line
-number, Ortho drawing/viewport и SHA baseline до DryRun.
-
-## Ortho source DataLinks and DCF control
-
-DataLinks активного Ortho drawing не являются источником Piping rows. Piping
-rows читаются из source model drawing и Piping project part, разрешённых через
-Ortho sheet/view definitions.
-
-Перед предположениями об Autodesk runtime API необходимо исследовать текущий
-код, доступный legacy usage, assembly metadata и реальные runtime types.
-Reflection/runtime inspection применяется только для подтверждения данных,
-которых нельзя установить статически. Production resolver не угадывает
-Autodesk properties по строковым именам.
-
-Подтверждённый контракт Plant 3D 2026: `IDwgViewDef.DwgQuery` →
-`IDwgQuery.ModelFiles` → `ModelFile[].ModelFileName`. При несовпадении типа
-возвращать `ORTHO_MODEL_FILES_API_UNSUPPORTED`, без fallback-эвристики.
-
-Проверка DCF выполняется на парных `control` и `DryRun` fixtures, созданных из
-одного закрытого состояния проекта. Сравнивать нужно `control delta` с
-`DryRun delta`: одинаковые изменения классифицируются как baseline behavior
-Plant 3D, а plugin-only изменения блокируют дальнейшую работу.

Plant3D2026/P_Rec_Annot/docs/annotation-plan-determinism.md

@@ -1,5 +0,0 @@
-# Annotation-plan determinism
-
-`AnnotationPlanBuilder` uses schema version `1`. Its canonical input is the normalized command, source drawing basename, view ID, source snapshots sorted by stable ID, properties sorted by key, membership state, and operations sorted by stable source key and type. Absolute paths, process data, timestamps and runtime ObjectIds are excluded.
-
-Runtime DryRun confirmed equal PlanIds and summaries for two calls of each supported command. Changing a relevant normalized input changes the PlanId.

Plant3D2026/P_Rec_Annot/docs/dcf-control-comparison.md

@@ -1,3 +0,0 @@
-# DCF control comparison
-
-`DBMOD` covers only the active DWG. DCF and project metadata require paired control and DryRun fixture copies created from one fully closed state. This comparison has not yet been executed, so plugin-only DCF and metadata deltas remain unverified. Apply remains blocked.

Plant3D2026/P_Rec_Annot/docs/evidence/ortho-determinism-summary.json

@@ -1,17 +0,0 @@
-{
-  "executionMode": "DryRun",
-  "planSchemaVersion": 1,
-  "sourceObjectsRead": 7,
-  "membershipResolved": 0,
-  "membershipPartial": 0,
-  "membershipUnresolved": 7,
-  "phpRecAnnotPlanIds": ["plan-C5D40DC32505D5D9CFE6D38B", "plan-C5D40DC32505D5D9CFE6D38B"],
-  "pxpAavPlanIds": ["plan-E4877CA13418D43A17F47AAA", "plan-E4877CA13418D43A17F47AAA"],
-  "pxpOaPlanIds": ["plan-6C794D25C292E73AA3BDDC31", "plan-6C794D25C292E73AA3BDDC31"],
-  "summariesDeterministic": true,
-  "dbmodBefore": 0,
-  "dbmodAfter": 0,
-  "launcherSession": "RolledBack",
-  "dcfControlComparison": null,
-  "applyModeUsed": false
-}

Plant3D2026/P_Rec_Annot/docs/evidence/ortho-runtime-summary.json

@@ -1,28 +0,0 @@
-{
-  "date": "2026-08-03",
-  "executionMode": "DryRun",
-  "plantProjectDetected": true,
-  "projectDisplayNameStatus": "FoundWithName",
-  "orthoDetection": "Confirmed",
-  "viewportCount": 1,
-  "dataLinksAvailable": true,
-  "dataLinksSheetToSourceMapping": "resolved-through-piping-project-drawing-id",
-  "sourceDrawingsResolved": 1,
-  "sourceDataLinksAvailable": true,
-  "objectsRead": 7,
-  "pipeObjectsRead": 7,
-  "phpRecAnnotRuns": 1,
-  "pxpAavRuns": null,
-  "pxpOaRuns": null,
-  "planId": null,
-  "repeatedPlanIdEqual": null,
-  "dbmodBefore": null,
-  "dbmodAfter": null,
-  "dwgModified": null,
-  "dcfModified": null,
-  "changedProjectFiles": null,
-  "unhandledExceptions": 0,
-  "applyModeUsed": false,
-  "launcherRollback": "RolledBack",
-  "exactViewportMembership": "not-verified"
-}

Plant3D2026/P_Rec_Annot/docs/ortho-runtime-results.md

@@ -1,28 +0,0 @@
-# Ortho DryRun runtime result
-
-Date: 2026-08-03
-
-The local test fixture's `TestPipeOrtho.dwg` was detected as Ortho with one
-viewport. In `DryRun`, `PHP_REC_ANNOT` ran twice, `PXP-AAV` ran twice, and
-`PXP-OA` ran once. All completed without an unhandled exception; `DBMOD` was
-`0` before and after.
-
-`PlantProject.Name` was available for this fixture and rendered as
-`PRecAnnotTestProject`.
-
-The active Ortho sheet does not expose direct Piping rows and must not be used
-as a DataLinks source. Metadata inspection and a sanitized runtime probe
-confirmed `IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName` as the source-model
-reference. The adapter resolves that reference through
-`PipingProject.GetPnPDrawingFiles()` and reads
-`DataLinksManager.SelectAcPpRowIds(PnPProjectDrawing.Id)`.
-
-On the latest real DryRun, one source drawing was resolved and seven source
-Plant objects were read. `PHP_REC_ANNOT` reported seven skipped operations,
-zero writes, zero conflicts, and zero errors. This verifies source-model
-DataLinks access; it does not yet verify exact source-object-to-viewport
-membership or repeated-plan determinism.
-
-The test fixture SHA baseline changed for `Piping.dcf` before the first DryRun
-command. This run therefore does not prove DCF invariance. A paired control
-fixture versus DryRun fixture comparison remains required.

Plant3D2026/P_Rec_Annot/docs/ortho-source-mapping.md

@@ -1,39 +0,0 @@
-# Ortho source-model mapping
-
-## Confirmed Plant 3D 2026 read path
-
-```text
-Active Ortho document
-→ OrthoProject.DwgSheetDefinitions
-→ IDwgSheetDef.DwgViewDefs
-→ IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName
-→ PipingProject.GetPnPDrawingFiles()
-→ exact normalized-path match to PnPProjectDrawing
-→ PnPProjectDrawing.Id
-→ DataLinksManager.SelectAcPpRowIds(int dwgid)
-→ GetObjectClassname / GetAllProperties
-→ independent PlantObjectSnapshot
-→ AnnotationPlanBuilder
-```
-
-`PlantOrthoViewportReader.ReadViewports` reads the typed DwgQuery contract and
-creates an Ortho viewport snapshot. `PlantObjectReader.ReadObjects` resolves
-the resulting model-file reference through the Piping project drawing list and
-reads DataLinks by project drawing ID. The active Ortho database is not a
-Piping-row source.
-
-All calls are read-only. The adapter opens no write transaction and does not
-save a drawing, DCF, or project metadata.
-
-## Diagnostics
-
-The source reader returns stable telemetry diagnostics rather than suppressing
-the result of a failed query: `ORTHO_SOURCE_DRAWING_NOT_RESOLVED`,
-`ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT`, `ORTHO_SOURCE_DRAWING_AMBIGUOUS`,
-`PIPING_PROJECT_PART_NOT_FOUND`, `SOURCE_DATALINKS_UNAVAILABLE`,
-`SOURCE_DATALINKS_NO_ROWS`, `SOURCE_DATABASE_READ_FAILED`,
-`SOURCE_PIPE_ROWS_NOT_FOUND`, or `SOURCE_DATALINKS_READ`.
-
-Exact membership of a source object in a particular Ortho viewport is not yet
-implemented. A source-level DryRun plan must not be presented as proof of
-viewport membership.

Plant3D2026/P_Rec_Annot/docs/ortho-viewport-membership.md

@@ -1,5 +0,0 @@
-# Ortho viewport membership
-
-Every source snapshot has an explicit `ViewMembershipStatus`. The current Plant 3D 2026 adapter has no confirmed official object-to-view mapping API, so the seven source objects are `NotResolved` and skipped with `VIEW_MEMBERSHIP_NOT_RESOLVED`. Source presence is not treated as viewport membership.
-
-No geometric heuristic is used as an exact mapping. The next step requires a confirmed generated-entity linkage or documented view mapping.

Plant3D2026/P_Rec_Annot/docs/research/dwgquery-model-files-api.md

@@ -1,101 +0,0 @@
-# Plant 3D 2026 DwgQuery / ModelFiles API contract
-
-## Scope and method
-
-This report is based on metadata-only inspection of the installed Plant 3D 2026
-assemblies. The assemblies were read from `<PLANT3D_2026_INSTALL>` and were not
-copied into the repository. Metadata-only inspection was necessary because the
-normal PowerShell host cannot load the product's .NET 8 dependencies safely.
-
-Legacy source at the documented local path was not present on this machine, so
-there is no legacy API claim in this report.
-
-## Confirmed assemblies
-
-| Assembly | Version | Relevant type |
-| --- | --- | --- |
-| `PnPDwg2dDef` | `0.0.0.0` | `Autodesk.ProcessPower.Drawings2d.DwgQuery`, `IDwgQuery`, `DwgViewDef`, `IDwgViewDef`, `DwgSheetDef`, `IDwgSheetDef` |
-| `PnPDwg2dUtil` | `0.0.0.0` | `Autodesk.ProcessPower.Drawings2d.ModelFile` |
-| `PnP3dOrthoProjectPart` | `17.0.60.1` | Ortho project-part integration assembly; the metadata scan found no public DwgQuery declaration there |
-
-`PnPDwg2dDef` and `PnPDwg2dUtil` use `0.0.0.0` assembly versions in the
-installed metadata. The supported runtime contract is therefore identified by
-the exact public type names below, not by an invented product-version number.
-
-## Confirmed contract
-
-```text
-Autodesk.ProcessPower.Drawings2d.IDwgViewDef.DwgQuery
-  : Autodesk.ProcessPower.Drawings2d.IDwgQuery
-
-Autodesk.ProcessPower.Drawings2d.IDwgQuery.ModelFiles
-  : Autodesk.ProcessPower.Drawings2d.ModelFile[]
-
-Autodesk.ProcessPower.Drawings2d.ModelFile.ModelFileName
-  : System.String
-
-Autodesk.ProcessPower.Drawings2d.ModelFile.ModelFileGuid
-  : System.String
-```
-
-`DwgViewDef` implements `IDwgViewDef`; `DwgQuery` implements `IDwgQuery` and
-`IDisposable`; `ModelFile` implements `IComparable<ModelFile>`.
-
-`ModelFiles` is an array, not an untyped enumerable. `ModelFileName` is the
-only confirmed string field representing the model-file reference. `ModelFileGuid`
-is a separate identity field. `IsReferencedDwg` and `Xform` describe reference
-state and transform, not a substitute path.
-
-## Public members relevant to source resolution
-
-`IDwgViewDef` exposes `DwgQuery`, `ViewName`, layout/orientation properties,
-and `SetClippingPlanes`, `SetLayout`, `SetOrientation`, `Erase`, and `New`.
-
-`IDwgQuery` exposes `ModelFiles`, `Execute`, and `Erase`.
-
-`ModelFile` exposes `ModelFileName`, `ModelFileGuid`, `IsReferencedDwg`, and
-`Xform`; its constructors accept a file-name string and optional transform,
-reference flag, and GUID.
-
-`IDwgSheetDef.DwgViewDefs` exposes the view-definition collection. Sheet
-`DwgName`/`DwgPath` identify the Ortho sheet and must not be used as the source
-of Piping DataLinks.
-
-## Current and legacy usage
-
-The original adapter used reflection and tried several possible names
-(`ModelFileName`, `Value`, and arbitrary string values). That was not a valid
-Plant 3D 2026 contract.
-
-The production read path now uses the confirmed typed chain only:
-
-```text
-IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName
-```
-
-The legacy source path was unavailable locally, so no legacy source-model or
-DataLinks workaround has been imported.
-
-## Runtime evidence
-
-Static metadata cannot prove whether `ModelFileName` is project-relative or
-absolute in a concrete Ortho fixture, or whether a particular view has zero,
-one, or multiple model files. In DryRun only, setting
-`P_REC_ANNOT_DIAGNOSTICS=OrthoStructure` enables a sanitized structure probe.
-It records type names, collection counts, null state, string length, and a
-one-way value hash; it does not emit paths or engineering data.
-
-On the local DryRun fixture, the runtime probe recorded one view with one
-`ModelFile`. The concrete types were `DwgViewDef`, `DwgQueryByBox`, and
-`ModelFile[]`; `ModelFileName` was non-null and an absolute fixture-model
-reference. The path itself was not retained in repository evidence.
-
-The resolver resolves that reference to exactly one
-`PipingProject.GetPnPDrawingFiles()` entry by normalized full-path equality,
-then uses the confirmed `DataLinksManager.SelectAcPpRowIds(int dwgid)` overload
-with the resolved `PnPProjectDrawing.Id`. It does not open or query the active
-Ortho database for Piping rows.
-
-The production resolver has no fallback property-name search. If the exact
-contract is unavailable at runtime it reports
-`ORTHO_MODEL_FILES_API_UNSUPPORTED` rather than guessing.

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Abstractions/Contracts.cs

@@ -8,7 +8,6 @@ public sealed record RuntimeDiagnostic
 }
 
 public enum OrthoDetectionStatus { Confirmed, NotOrtho, Ambiguous, Unsupported, Failed }
-public enum PlantProjectDetectionStatus { NotFound, FoundWithName, FoundWithoutDisplayName, Ambiguous, Failed }
 
 public sealed record OrthoDetectionResult
 {
@@ -58,12 +57,8 @@ public sealed record PlantObjectSnapshot
     public required GeometrySnapshot Geometry { get; init; }
     public IReadOnlyDictionary<string, string?> Properties { get; init; } = new Dictionary<string, string?>();
     public IReadOnlyList<string> Diagnostics { get; init; } = Array.Empty<string>();
-    public ViewMembershipStatus MembershipStatus { get; init; } = ViewMembershipStatus.NotResolved;
-    public IReadOnlyList<string> MembershipEvidenceCodes { get; init; } = Array.Empty<string>();
 }
 
-public enum ViewMembershipStatus { NotResolved, Resolved, PartiallyResolved, ObjectOutsideView, Unsupported, Failed }
-
 public sealed record PlantRuntimeContext
 {
     public bool HasActiveDocument { get; init; }
@@ -71,7 +66,6 @@ public sealed record PlantRuntimeContext
     public bool IsOrthoDrawing { get; init; }
     public string? DrawingName { get; init; }
     public string? ProjectDisplayName { get; init; }
-    public PlantProjectDetectionStatus ProjectDetectionStatus { get; init; } = PlantProjectDetectionStatus.NotFound;
     public IReadOnlyList<OrthoViewportInfo> Viewports { get; init; } = Array.Empty<OrthoViewportInfo>();
     public IReadOnlyList<RuntimeDiagnostic> Diagnostics { get; init; } = Array.Empty<RuntimeDiagnostic>();
     public OrthoDetectionResult Detection { get; init; } = new() { Status = OrthoDetectionStatus.Unsupported, Evidence = Array.Empty<string>(), Diagnostics = Array.Empty<RuntimeDiagnostic>() };
@@ -80,62 +74,6 @@ public sealed record PlantRuntimeContext
 public interface IPlantRuntimeContextReader { PlantRuntimeContext ReadCurrentContext(); }
 public interface IOrthoViewportReader { IReadOnlyList<OrthoViewportInfo> ReadViewports(CancellationToken cancellationToken); }
 
-public enum SourceDrawingResolutionStatus { Resolved, NotReferenced, Ambiguous, MissingFromProject, Unsupported, Failed }
-
-public sealed record OrthoSourceDrawingReference
-{
-    public required string StableId { get; init; }
-    public required string DisplayName { get; init; }
-    public string? ProjectRelativePath { get; init; }
-    public long? ProjectDrawingRowId { get; init; }
-    public required SourceDrawingResolutionStatus Status { get; init; }
-    public IReadOnlyList<string> EvidenceCodes { get; init; } = Array.Empty<string>();
-}
-
-public sealed record SourcePlantObjectSnapshot
-{
-    public required string StableObjectKey { get; init; }
-    public required string ClassName { get; init; }
-    public string? SourceDrawingStableId { get; init; }
-    public string? LineGroupStableKey { get; init; }
-    public IReadOnlyDictionary<string, string?> Properties { get; init; } = new Dictionary<string, string?>();
-}
-
-public sealed record SourceDrawingReadResult
-{
-    public required OrthoSourceDrawingReference Source { get; init; }
-    public IReadOnlyList<SourcePlantObjectSnapshot> Objects { get; init; } = Array.Empty<SourcePlantObjectSnapshot>();
-    public IReadOnlyList<RuntimeDiagnostic> Diagnostics { get; init; } = Array.Empty<RuntimeDiagnostic>();
-}
-
-public interface IOrthoSourceDrawingResolver
-{
-    IReadOnlyList<OrthoSourceDrawingReference> Resolve(OrthoDrawingSnapshot drawing);
-}
-
-public sealed record OrthoDrawingSnapshot
-{
-    public required string StableId { get; init; }
-    public IReadOnlyList<OrthoViewSourceSnapshot> Views { get; init; } = Array.Empty<OrthoViewSourceSnapshot>();
-}
-
-public sealed record OrthoViewSourceSnapshot
-{
-    public required string ViewStableId { get; init; }
-    public IReadOnlyList<string> ReferencedDrawingPaths { get; init; } = Array.Empty<string>();
-}
-
-public interface ISourceDrawingDataLinksReader
-{
-    SourceDrawingReadResult Read(PlantProjectContext project, OrthoSourceDrawingReference source);
-}
-
-public sealed record PlantProjectContext
-{
-    public required string StableProjectId { get; init; }
-    public string? ProjectDisplayName { get; init; }
-}
-
 public enum AnnotationOperationKind { Create, Update, Skip, Conflict, Unsupported }
 
 public sealed record AnnotationOperationPlan
@@ -210,7 +148,6 @@ public sealed record AnnotationIntent
 
 public sealed record AnnotationPlan
 {
-    public int PlanSchemaVersion { get; init; }
     public string PlanId { get; init; } = string.Empty;
     public string CommandName { get; init; } = string.Empty;
     public IReadOnlyList<AnnotationOperationPlan> Operations { get; init; } = Array.Empty<AnnotationOperationPlan>();

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Core/AnnotationPlanBuilder.cs

@@ -6,7 +6,6 @@ namespace PRecAnnot.Core;
 
 public sealed class AnnotationPlanBuilder : IAnnotationPlanBuilder
 {
-    public const int CurrentPlanSchemaVersion = 1;
     public AnnotationPlan Build(AnnotationPlanningRequest request)
     {
         var objects = request.Objects.OrderBy(x => x.SnapshotId, StringComparer.Ordinal).ToArray();
@@ -31,12 +30,6 @@ public sealed class AnnotationPlanBuilder : IAnnotationPlanBuilder
                 continue;
             }
 
-            if (item.MembershipStatus is not ViewMembershipStatus.Resolved and not ViewMembershipStatus.PartiallyResolved)
-            {
-                operations.Add(new AnnotationOperationPlan { SourceSnapshotId = item.SnapshotId, Kind = AnnotationOperationKind.Skip, Reasons = new[] { "VIEW_MEMBERSHIP_NOT_RESOLVED" } });
-                continue;
-            }
-
             var text = string.IsNullOrWhiteSpace(item.LineNumber) ? item.Tag?.Trim() : item.LineNumber!.Trim();
             if (string.IsNullOrWhiteSpace(text))
             {
@@ -91,8 +84,7 @@ public sealed class AnnotationPlanBuilder : IAnnotationPlanBuilder
 
         return new AnnotationPlan
         {
-            PlanSchemaVersion = CurrentPlanSchemaVersion,
-            PlanId = BuildPlanId(request, objects, operations),
+            PlanId = BuildPlanId(request, objects),
             CommandName = request.CommandName,
             Operations = operations,
             Diagnostics = diagnostics,
@@ -100,31 +92,18 @@ public sealed class AnnotationPlanBuilder : IAnnotationPlanBuilder
             Create = creates,
             Update = updates,
             Delete = Array.Empty<string>(),
-            SkipReasons = operations.Where(x => x.Kind == AnnotationOperationKind.Skip).SelectMany(x => x.Reasons).OrderBy(x => x, StringComparer.Ordinal).ToArray(),
+            SkipReasons = operations.Where(x => x.Kind == AnnotationOperationKind.Skip).SelectMany(x => x.Reasons).ToArray(),
             ExaminedCount = objects.Length,
             IsDeterministic = true
         };
     }
 
-    private static string BuildPlanId(AnnotationPlanningRequest request, IReadOnlyList<PlantObjectSnapshot> objects, IReadOnlyList<AnnotationOperationPlan> operations)
+    private static string BuildPlanId(AnnotationPlanningRequest request, IReadOnlyList<PlantObjectSnapshot> objects)
     {
-        var canonical = new StringBuilder("schema=").Append(CurrentPlanSchemaVersion)
-            .Append("|command=").Append(Normalize(request.CommandName))
-            .Append("|source=").Append(Normalize(Path.GetFileName(request.Viewport.SourceDrawingName)))
-            .Append("|view=").Append(Normalize(request.Viewport.Id));
-        foreach (var item in objects.OrderBy(x => x.SnapshotId, StringComparer.Ordinal))
-        {
-            canonical.Append("|object=").Append(Normalize(item.SnapshotId)).Append('|').Append(Normalize(item.ObjectClass))
-                .Append('|').Append(Normalize(item.Tag)).Append('|').Append(Normalize(item.LineNumber))
-                .Append('|').Append(item.MembershipStatus);
-            foreach (var property in item.Properties.OrderBy(x => x.Key, StringComparer.Ordinal))
-                canonical.Append("|property=").Append(Normalize(property.Key)).Append('=').Append(Normalize(property.Value));
-        }
-        foreach (var operation in operations.OrderBy(x => x.SourceSnapshotId, StringComparer.Ordinal).ThenBy(x => x.Kind))
-            canonical.Append("|operation=").Append(Normalize(operation.SourceSnapshotId)).Append(':').Append(operation.Kind).Append(':').Append(string.Join(',', operation.Reasons.OrderBy(x => x, StringComparer.Ordinal)));
+        var canonical = new StringBuilder(request.CommandName).Append('|').Append(request.Viewport.SourceDrawingName).Append('|').Append(request.Viewport.Id);
+        foreach (var item in objects)
+            canonical.Append('|').Append(item.SnapshotId).Append('|').Append(item.ObjectClass).Append('|').Append(item.Tag).Append('|').Append(item.LineNumber).Append('|').Append(item.Geometry.PaperPosition);
         var hash = SHA256.HashData(Encoding.UTF8.GetBytes(canonical.ToString()));
         return "plan-" + Convert.ToHexString(hash)[..24];
     }
-
-    private static string Normalize(string? value) => (value ?? string.Empty).Trim().Normalize(NormalizationForm.FormC);
 }

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Core/AnnotationRuleEngine.cs

@@ -12,8 +12,7 @@ public sealed class AnnotationRuleEngine : IAnnotationRuleEngine
             ObjectClass = item.ClassName,
             Tag = item.Tag,
             LineNumber = item.LineNumber,
-            Geometry = new GeometrySnapshot { PaperPosition = new Point2Dto(item.Position.X, item.Position.Y), Rotation = item.Rotation },
-            MembershipStatus = ViewMembershipStatus.Resolved
+            Geometry = new GeometrySnapshot { PaperPosition = new Point2Dto(item.Position.X, item.Position.Y), Rotation = item.Rotation }
         }).ToArray();
 
         return new AnnotationPlanBuilder().Build(new AnnotationPlanningRequest

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Core/OrthoSourceDrawingResolver.cs

@@ -1,47 +0,0 @@
-using System.Security.Cryptography;
-using System.Text;
-using PRecAnnot.Abstractions;
-
-namespace PRecAnnot.Core;
-
-public sealed class OrthoSourceDrawingResolver : IOrthoSourceDrawingResolver
-{
-    public IReadOnlyList<OrthoSourceDrawingReference> Resolve(OrthoDrawingSnapshot drawing)
-    {
-        var candidates = drawing.Views
-            .OrderBy(x => x.ViewStableId, StringComparer.Ordinal)
-            .SelectMany(x => x.ReferencedDrawingPaths)
-            .Where(x => !string.IsNullOrWhiteSpace(x))
-            .Select(x => x.Trim().Replace('\\', '/'))
-            .Distinct(StringComparer.OrdinalIgnoreCase)
-            .OrderBy(x => x, StringComparer.OrdinalIgnoreCase)
-            .Select(path => new OrthoSourceDrawingReference
-            {
-                StableId = StableId(drawing.StableId, path),
-                DisplayName = Path.GetFileName(path),
-                ProjectRelativePath = path,
-                Status = SourceDrawingResolutionStatus.Resolved,
-                EvidenceCodes = new[] { "SOURCE_FROM_VIEW_DEFINITION", "SOURCE_PATH_MATCHED_PROJECT_RELATIVE" }
-            })
-            .ToArray();
-
-        return candidates.Length != 0
-            ? candidates
-            : new[]
-            {
-                new OrthoSourceDrawingReference
-                {
-                    StableId = StableId(drawing.StableId, "none"),
-                    DisplayName = "source drawing unavailable",
-                    Status = SourceDrawingResolutionStatus.NotReferenced,
-                    EvidenceCodes = new[] { "ORTHO_SOURCE_DRAWING_NOT_RESOLVED" }
-                }
-            };
-    }
-
-    private static string StableId(string drawingId, string source)
-    {
-        var hash = SHA256.HashData(Encoding.UTF8.GetBytes($"{drawingId}|{source}"));
-        return "src-" + Convert.ToHexString(hash)[..20];
-    }
-}

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/EntryPoint.cs

@@ -77,11 +77,9 @@ public sealed class EntryPoint : IExtensionApplication
 
             var builder = new AnnotationPlanBuilder();
             var plans = new List<AnnotationPlan>();
-            var objectsByViewport = new List<IReadOnlyList<PlantObjectSnapshot>>();
             foreach (var viewport in context.Viewports)
             {
                 var objects = new PlantObjectReader().ReadObjects(viewport, CancellationToken.None);
-                objectsByViewport.Add(objects);
                 plans.Add(builder.Build(new AnnotationPlanningRequest { CommandName = commandName, Viewport = viewport, Objects = objects }));
             }
 
@@ -96,16 +94,7 @@ public sealed class EntryPoint : IExtensionApplication
                 WarningCount = plans.Sum(x => x.Summary.WarningCount),
                 ErrorCount = plans.Sum(x => x.Summary.ErrorCount)
             };
-            var membershipResolved = objectsByViewport.SelectMany(x => x).Count(x => x.MembershipStatus == ViewMembershipStatus.Resolved);
-            var membershipPartial = objectsByViewport.SelectMany(x => x).Count(x => x.MembershipStatus == ViewMembershipStatus.PartiallyResolved);
-            var membershipUnresolved = objectsByViewport.SelectMany(x => x).Count(x => x.MembershipStatus == ViewMembershipStatus.NotResolved);
-            var planId = plans.Count == 1 ? plans[0].PlanId : null;
             details["ObjectsExamined"] = summary.ObjectsExamined;
-            details["PlanSchemaVersion"] = AnnotationPlanBuilder.CurrentPlanSchemaVersion;
-            details["PlanId"] = planId;
-            details["MembershipResolved"] = membershipResolved;
-            details["MembershipPartial"] = membershipPartial;
-            details["MembershipUnresolved"] = membershipUnresolved;
             details["PlanCreateCount"] = summary.CreateCount;
             details["PlanUpdateCount"] = summary.UpdateCount;
             details["PlanSkipCount"] = summary.SkipCount;
@@ -114,7 +103,6 @@ public sealed class EntryPoint : IExtensionApplication
             details["ErrorCount"] = summary.ErrorCount;
             RuntimeDiagnostics.Write("CommandPreflightCompleted", operationId: operationId, commandName: commandName, resultStatus: "DryRunCompleted", document: document, details: details);
             WriteEditor(document, $"\nP_Rec_Annot — диагностический план\nПроект: {context.ProjectDisplayName}\nТип чертежа: Ortho\nViewport: {context.Viewports.Count}\nОбъектов найдено: {summary.ObjectsExamined}\nБудет создано: {summary.CreateCount}\nБудет обновлено: {summary.UpdateCount}\nБудет пропущено: {summary.SkipCount}\nКонфликтов: {summary.ConflictCount}\nОшибок: {summary.ErrorCount}\nDWG не изменён.");
-            WriteEditor(document, $"\nPlan schema: {AnnotationPlanBuilder.CurrentPlanSchemaVersion}; PlanId: {planId ?? "multiple"}; membership resolved/partial/unresolved: {membershipResolved}/{membershipPartial}/{membershipUnresolved}.");
             WriteUsage(operationId, commandName, "DryRunCompleted", document, details, stopwatch.ElapsedMilliseconds);
             RuntimeDiagnostics.Write("CommandCompleted", operationId: operationId, commandName: commandName, resultStatus: "DryRunCompleted", document: document, details: details);
         }

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/OrthoRuntimeStructureInspector.cs

@@ -1,81 +0,0 @@
-using System.Collections;
-using System.Reflection;
-using System.Security.Cryptography;
-using System.Text;
-using Autodesk.ProcessPower.Drawings2d;
-
-namespace PRecAnnot.Plant3D2026;
-
-// This is a diagnostic-only probe. It is never part of source resolution and is
-// called only by the explicit DryRun/OrthoStructure environment flag combination.
-internal static class OrthoRuntimeStructureInspector
-{
-    public static void Inspect(IDwgViewDef view)
-    {
-        if (!RuntimeDiagnostics.IsOrthoStructureDiagnosticsEnabled) return;
-
-        try
-        {
-            var query = view.DwgQuery;
-            var modelFiles = query?.ModelFiles;
-            var details = new Dictionary<string, object?>
-            {
-                ["ViewRuntimeType"] = TypeName(view.GetType()),
-                ["DwgQueryRuntimeType"] = query is null ? null : TypeName(query.GetType()),
-                ["ModelFilesDeclaredType"] = typeof(ModelFile[]).FullName,
-                ["ModelFilesRuntimeType"] = modelFiles?.GetType().AssemblyQualifiedName,
-                ["ModelFilesCount"] = modelFiles?.Length ?? 0,
-                ["ModelFileElements"] = modelFiles?.Select(DescribeModelFile).ToArray() ?? Array.Empty<IReadOnlyDictionary<string, object?>>()
-            };
-            RuntimeDiagnostics.Write("OrthoRuntimeStructureInspected", resultStatus: "Captured", details: details);
-        }
-        catch (Exception exception)
-        {
-            RuntimeDiagnostics.Write("OrthoRuntimeStructureInspectionFailed", "WARNING", resultStatus: "Failed", exception: exception);
-        }
-    }
-
-    private static IReadOnlyDictionary<string, object?> DescribeModelFile(ModelFile? modelFile)
-    {
-        if (modelFile is null)
-        {
-            return new Dictionary<string, object?> { ["IsNull"] = true };
-        }
-
-        var properties = modelFile.GetType()
-            .GetProperties(BindingFlags.Instance | BindingFlags.Public)
-            .Where(property => property.CanRead && property.GetIndexParameters().Length == 0)
-            .OrderBy(property => property.Name, StringComparer.Ordinal)
-            .Select(property => DescribeProperty(modelFile, property))
-            .ToArray();
-        return new Dictionary<string, object?>
-        {
-            ["RuntimeType"] = TypeName(modelFile.GetType()),
-            ["Properties"] = properties
-        };
-    }
-
-    private static IReadOnlyDictionary<string, object?> DescribeProperty(ModelFile modelFile, PropertyInfo property)
-    {
-        object? value;
-        try { value = property.GetValue(modelFile); }
-        catch { value = null; }
-        return new Dictionary<string, object?>
-        {
-            ["PropertyName"] = property.Name,
-            ["PropertyType"] = property.PropertyType.FullName,
-            ["ValueKind"] = value?.GetType().FullName ?? "null",
-            ["IsNull"] = value is null,
-            ["StringLength"] = value is string text ? text.Length : null,
-            ["PathKind"] = property.Name == "ModelFileName" && value is string path
-                ? (Path.IsPathRooted(path) ? "Absolute" : "ProjectRelative")
-                : null,
-            ["CollectionCount"] = value is ICollection collection ? collection.Count : null,
-            ["StableHash"] = value is null ? null : Hash(value.ToString() ?? string.Empty)
-        };
-    }
-
-    private static string TypeName(Type type) => $"{type.FullName}, {type.Assembly.GetName().Name}, {type.Assembly.GetName().Version}";
-
-    private static string Hash(string value) => Convert.ToHexString(SHA256.HashData(Encoding.UTF8.GetBytes(value)))[..16];
-}

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/PRecAnnot.Plant3D2026.csproj

@@ -14,9 +14,7 @@
     <Reference Include="PnPDataObjects"><HintPath>$(AutoCAD2026ManagedDir)\PnPDataObjects.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnPProjectManagerMgd"><HintPath>$(Plant3D2026ManagedDir)\PnPProjectManagerMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnP3dObjectsMgd"><HintPath>$(Plant3D2026ManagedDir)\PnP3dObjectsMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
-    <Reference Include="PnP3dProjectPartsMgd"><HintPath>$(Plant3D2026ManagedDir)\PnP3dProjectPartsMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnP3dOrthoProjectPart"><HintPath>$(Plant3D2026ManagedDir)\PnP3dOrthoProjectPart.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnPDwg2dDef"><HintPath>$(Plant3D2026ManagedDir)\PnPDwg2dDef.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
-    <Reference Include="PnPDwg2dUtil"><HintPath>$(Plant3D2026ManagedDir)\PnPDwg2dUtil.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
   </ItemGroup>
 </Project>

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/PlantReadPath.cs

@@ -1,9 +1,7 @@
 using System.Security.Cryptography;
 using System.Text;
 using Autodesk.AutoCAD.ApplicationServices;
-using Autodesk.AutoCAD.DatabaseServices;
 using Autodesk.ProcessPower.DataLinks;
-using Autodesk.ProcessPower.Drawings2d;
 using Autodesk.ProcessPower.P3dProjectParts;
 using Autodesk.ProcessPower.PlantInstance;
 using Autodesk.ProcessPower.ProjectManager;
@@ -34,9 +32,6 @@ internal sealed class PlantRuntimeContextReader : IPlantRuntimeContextReader
             return Empty(true, false, "NO_PLANT_PROJECT", "Активный Plant 3D-проект не найден.");
         }
 
-        var displayName = string.IsNullOrWhiteSpace(project.Name) ? null : project.Name.Trim();
-        var projectStatus = displayName is null ? PlantProjectDetectionStatus.FoundWithoutDisplayName : PlantProjectDetectionStatus.FoundWithName;
-
         OrthoProject? orthoProject;
         try { orthoProject = PlantApplication.ProjectPart("Ortho") as OrthoProject; }
         catch (Exception exception)
@@ -65,10 +60,9 @@ internal sealed class PlantRuntimeContextReader : IPlantRuntimeContextReader
                 HasPlantProject = true,
                 IsOrthoDrawing = true,
                 DrawingName = Path.GetFileName(document.Name),
-                ProjectDisplayName = displayName ?? "display name unavailable",
-                ProjectDetectionStatus = projectStatus,
+                ProjectDisplayName = project.Name,
                 Viewports = viewports,
-                Diagnostics = displayName is null ? new[] { new RuntimeDiagnostic { Code = "PLANT_PROJECT_DISPLAY_NAME_EMPTY", Message = "Plant project is open but no display name is available.", Severity = "Warning" } } : Array.Empty<RuntimeDiagnostic>(),
+                Diagnostics = Array.Empty<RuntimeDiagnostic>(),
                 Detection = new OrthoDetectionResult
                 {
                     Status = OrthoDetectionStatus.Confirmed,
@@ -88,8 +82,6 @@ internal sealed class PlantRuntimeContextReader : IPlantRuntimeContextReader
         HasActiveDocument = hasDocument,
         HasPlantProject = hasProject,
         IsOrthoDrawing = false,
-        ProjectDisplayName = hasProject ? "display name unavailable" : null,
-        ProjectDetectionStatus = hasProject ? PlantProjectDetectionStatus.Ambiguous : PlantProjectDetectionStatus.NotFound,
         Diagnostics = new[] { new RuntimeDiagnostic { Code = code, Message = message } },
         Detection = new OrthoDetectionResult { Status = status, Evidence = evidence, Diagnostics = new[] { new RuntimeDiagnostic { Code = code, Message = message } } }
     };
@@ -132,7 +124,7 @@ internal sealed class PlantOrthoViewportReader : IOrthoViewportReader
                         TwistAngle = 0,
                         IsOn = true,
                         IsLocked = false,
-                        SourceDrawingName = ReadSourceDrawingPath(view),
+                        SourceDrawingName = sheet.DwgName,
                         ViewName = view.ViewName
                     });
                 }
@@ -151,229 +143,52 @@ internal sealed class PlantOrthoViewportReader : IOrthoViewportReader
         var hash = SHA256.HashData(Encoding.UTF8.GetBytes(sheetId + "|" + viewName));
         return "vp-" + Convert.ToHexString(hash)[..20];
     }
-
-    private static string? ReadSourceDrawingPath(IDwgViewDef view)
-    {
-        // Confirmed Plant 3D 2026 contract (PnPDwg2dDef/PnPDwg2dUtil):
-        // IDwgViewDef.DwgQuery -> IDwgQuery.ModelFiles -> ModelFile.ModelFileName.
-        // The Ortho sheet is never used as a Piping DataLinks source.
-        try
-        {
-            if (!OrthoModelFilesContract.IsSupported(view, out var diagnostic))
-            {
-                RuntimeDiagnostics.Write("OrthoModelFilesContractRejected", "WARNING", resultStatus: diagnostic.Code, details: diagnostic.Details);
-                return null;
-            }
-
-            if (RuntimeDiagnostics.IsOrthoStructureDiagnosticsEnabled)
-            {
-                OrthoRuntimeStructureInspector.Inspect(view);
-            }
-
-            return view.DwgQuery?.ModelFiles
-                .Select(file => file.ModelFileName)
-                .FirstOrDefault(value => !string.IsNullOrWhiteSpace(value));
-        }
-        catch (Exception exception)
-        {
-            RuntimeDiagnostics.Write("OrthoModelFilesReadFailed", "WARNING", resultStatus: "ORTHO_MODEL_FILES_API_UNSUPPORTED", exception: exception);
-        }
-        return null;
-    }
 }
 
-internal static class OrthoModelFilesContract
-{
-    private const string ExpectedViewType = "Autodesk.ProcessPower.Drawings2d.DwgViewDef";
-    private const string ExpectedQueryType = "Autodesk.ProcessPower.Drawings2d.DwgQueryByBox";
-    private const string ExpectedModelFileType = "Autodesk.ProcessPower.Drawings2d.ModelFile";
-    private const string ExpectedDefAssembly = "PnPDwg2dDef";
-    private const string ExpectedUtilAssembly = "PnPDwg2dUtil";
-    private const string ExpectedVersion = "0.0.0.0";
-
-    public static bool IsSupported(IDwgViewDef view, out OrthoModelFilesContractDiagnostic diagnostic)
-    {
-        var query = view.DwgQuery;
-        var files = query?.ModelFiles;
-        var valid = HasExpectedType(view, ExpectedViewType, ExpectedDefAssembly) &&
-                    query is not null && HasExpectedType(query, ExpectedQueryType, ExpectedDefAssembly) &&
-                    files is not null && files.GetType() == typeof(ModelFile[]) &&
-                    files.All(file => file is not null && HasExpectedType(file, ExpectedModelFileType, ExpectedUtilAssembly));
-        diagnostic = new OrthoModelFilesContractDiagnostic(
-            valid ? "ORTHO_MODEL_FILES_API_SUPPORTED" : "ORTHO_MODEL_FILES_API_UNSUPPORTED",
-            new Dictionary<string, object?>
-            {
-                ["ExpectedViewType"] = ExpectedViewType,
-                ["ActualViewType"] = TypeName(view),
-                ["ExpectedQueryType"] = ExpectedQueryType,
-                ["ActualQueryType"] = query is null ? null : TypeName(query),
-                ["ExpectedModelFileType"] = ExpectedModelFileType,
-                ["ActualModelFilesType"] = files?.GetType().AssemblyQualifiedName,
-                ["ExpectedAssemblyVersion"] = ExpectedVersion,
-                ["ActualViewAssemblyVersion"] = view.GetType().Assembly.GetName().Version?.ToString(),
-                ["ActualQueryAssemblyVersion"] = query?.GetType().Assembly.GetName().Version?.ToString(),
-                ["ActualModelFilesAssemblyVersion"] = files?.GetType().Assembly.GetName().Version?.ToString()
-            });
-        return valid;
-    }
-
-    private static bool HasExpectedType(object value, string expectedType, string expectedAssembly) =>
-        string.Equals(value.GetType().FullName, expectedType, StringComparison.Ordinal) &&
-        string.Equals(value.GetType().Assembly.GetName().Name, expectedAssembly, StringComparison.Ordinal) &&
-        string.Equals(value.GetType().Assembly.GetName().Version?.ToString(), ExpectedVersion, StringComparison.Ordinal);
-
-    private static string TypeName(object value) => $"{value.GetType().FullName}, {value.GetType().Assembly.GetName().Name}, {value.GetType().Assembly.GetName().Version}";
-}
-
-internal sealed record OrthoModelFilesContractDiagnostic(string Code, IReadOnlyDictionary<string, object?> Details);
-
 internal sealed class PlantObjectReader : IPlantObjectReader
 {
     public IReadOnlyList<PlantObjectSnapshot> ReadObjects(OrthoViewportInfo viewport, CancellationToken cancellationToken)
     {
-        if (string.IsNullOrWhiteSpace(viewport.SourceDrawingName))
-        {
-            WriteOutcome("ORTHO_SOURCE_DRAWING_NOT_RESOLVED", viewport);
-            return Array.Empty<PlantObjectSnapshot>();
-        }
-
-        PipingProject? pipingProject;
-        try { pipingProject = PlantApplication.ProjectPart("Piping") as PipingProject; }
-        catch (Exception exception)
-        {
-            WriteOutcome("PIPING_PROJECT_PART_NOT_FOUND", viewport, exception);
-            return Array.Empty<PlantObjectSnapshot>();
-        }
-        if (pipingProject is null)
-        {
-            WriteOutcome("PIPING_PROJECT_PART_NOT_FOUND", viewport);
-            return Array.Empty<PlantObjectSnapshot>();
-        }
-
-        var sourceDrawing = ResolveProjectDrawing(pipingProject, viewport.SourceDrawingName);
-        if (sourceDrawing is null) return Array.Empty<PlantObjectSnapshot>();
+        var document = AcadApplication.DocumentManager.MdiActiveDocument;
+        if (document is null) return Array.Empty<PlantObjectSnapshot>();
 
         DataLinksManager? dataLinks;
-        try { dataLinks = pipingProject.DataLinksManager; }
-        catch (Exception exception)
-        {
-            WriteOutcome("SOURCE_DATALINKS_UNAVAILABLE", viewport, exception);
-            return Array.Empty<PlantObjectSnapshot>();
-        }
-        if (dataLinks is null)
-        {
-            WriteOutcome("SOURCE_DATALINKS_UNAVAILABLE", viewport);
-            return Array.Empty<PlantObjectSnapshot>();
-        }
+        try { dataLinks = PlantApplication.ProjectPart("Piping")?.DataLinksManager; }
+        catch { return Array.Empty<PlantObjectSnapshot>(); }
+        if (dataLinks is null) return Array.Empty<PlantObjectSnapshot>();
 
         var snapshots = new List<PlantObjectSnapshot>();
-        try
+        foreach (var rowId in dataLinks.SelectAcPpRowIds(document.Database))
         {
-            // Confirmed Plant 3D 2026 contract: resolve the source model to the
-            // Piping project drawing record, then read its DataLinks by drawing Id.
-            // The active Ortho database is deliberately never passed to DataLinks.
-            var rowIds = dataLinks.SelectAcPpRowIds(sourceDrawing.Id);
-            if (rowIds.Count == 0)
+            try
             {
-                WriteOutcome("SOURCE_DATALINKS_NO_ROWS", viewport, details: new Dictionary<string, object?> { ["ProjectDrawingResolved"] = true });
-                return Array.Empty<PlantObjectSnapshot>();
+                cancellationToken.ThrowIfCancellationRequested();
+                var className = dataLinks.GetObjectClassname(rowId);
+                var properties = dataLinks.GetAllProperties(rowId, true)
+                    .GroupBy(x => x.Key, StringComparer.OrdinalIgnoreCase)
+                    .ToDictionary(x => x.Key, x => x.Last().Value, StringComparer.OrdinalIgnoreCase);
+                string? Value(params string[] names) => properties.FirstOrDefault(x => names.Any(name => string.Equals(name, x.Key, StringComparison.OrdinalIgnoreCase))).Value;
+                snapshots.Add(new PlantObjectSnapshot
+                {
+                    SnapshotId = StableId(Path.GetFileName(document.Name), rowId, className),
+                    ObjectClass = className ?? string.Empty,
+                    Tag = Value("Tag", "TAG"),
+                    LineNumber = Value("Line Number", "LineNumber", "LINENUMBER"),
+                    SupportNumber = Value("Support Number", "SupportNumber"),
+                    EquipmentNumber = Value("Equipment Number", "EquipmentNumber"),
+                    Geometry = new GeometrySnapshot(),
+                    Properties = properties.ToDictionary(x => x.Key, x => (string?)x.Value, StringComparer.OrdinalIgnoreCase),
+                    Diagnostics = new[] { "GEOMETRY_NOT_MAPPED" }
+                });
             }
-
-            foreach (var rowId in rowIds)
+            catch
             {
-                try
-                {
-                    cancellationToken.ThrowIfCancellationRequested();
-                    var className = dataLinks.GetObjectClassname(rowId);
-                    var properties = dataLinks.GetAllProperties(rowId, true)
-                        .GroupBy(x => x.Key, StringComparer.OrdinalIgnoreCase)
-                        .ToDictionary(x => x.Key, x => x.Last().Value, StringComparer.OrdinalIgnoreCase);
-                    string? Value(params string[] names) => properties.FirstOrDefault(x => names.Any(name => string.Equals(name, x.Key, StringComparison.OrdinalIgnoreCase))).Value;
-                    snapshots.Add(new PlantObjectSnapshot
-                    {
-                        SnapshotId = StableId(viewport.SourceDrawingName, rowId, className),
-                        ObjectClass = className ?? string.Empty,
-                        Tag = Value("Tag", "TAG"),
-                        LineNumber = Value("Line Number", "LineNumber", "LINENUMBER"),
-                        SupportNumber = Value("Support Number", "SupportNumber"),
-                        EquipmentNumber = Value("Equipment Number", "EquipmentNumber"),
-                        Geometry = new GeometrySnapshot(),
-                        Properties = properties.ToDictionary(x => x.Key, x => (string?)x.Value, StringComparer.OrdinalIgnoreCase),
-                        Diagnostics = new[] { "GEOMETRY_NOT_MAPPED" }
-                    });
-                }
-                catch (Exception exception)
-                {
-                    RuntimeDiagnostics.Write("SourceDataLinksRowReadFailed", "WARNING", resultStatus: "SOURCE_DATABASE_READ_FAILED", exception: exception);
-                }
+                // Keep the read path best-effort; no write operation is attempted.
             }
         }
-        catch (DLException exception)
-        {
-            WriteOutcome("SOURCE_DATALINKS_UNAVAILABLE", viewport, exception);
-        }
-        catch (Exception exception)
-        {
-            WriteOutcome("SOURCE_DATABASE_READ_FAILED", viewport, exception);
-        }
-
-        WriteOutcome(snapshots.Count == 0 ? "SOURCE_PIPE_ROWS_NOT_FOUND" : "SOURCE_DATALINKS_READ", viewport,
-            details: new Dictionary<string, object?> { ["SourcePlantObjectsRead"] = snapshots.Count, ["PipeObjectsRead"] = snapshots.Count });
         return snapshots.OrderBy(x => x.SnapshotId, StringComparer.Ordinal).ToArray();
     }
 
-    private static PnPProjectDrawing? ResolveProjectDrawing(PipingProject pipingProject, string sourceDrawingPath)
-    {
-        if (!Path.IsPathRooted(sourceDrawingPath))
-        {
-            WriteOutcome("ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT", null);
-            return null;
-        }
-
-        string normalizedSource;
-        try { normalizedSource = Path.GetFullPath(sourceDrawingPath); }
-        catch (Exception exception)
-        {
-            WriteOutcome("ORTHO_SOURCE_DRAWING_NOT_RESOLVED", null, exception);
-            return null;
-        }
-
-        var matches = pipingProject.GetPnPDrawingFiles()
-            .Where(drawing => MatchesSourcePath(drawing, normalizedSource))
-            .OrderBy(drawing => drawing.Id)
-            .ToArray();
-        if (matches.Length == 1)
-        {
-            RuntimeDiagnostics.Write("SourceProjectDrawingResolved", resultStatus: "SOURCE_FROM_PROJECT_DRAWING_ROW", details: new Dictionary<string, object?> { ["ProjectDrawingResolved"] = true });
-            return matches[0];
-        }
-
-        WriteOutcome(matches.Length == 0 ? "ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT" : "ORTHO_SOURCE_DRAWING_AMBIGUOUS", null,
-            details: new Dictionary<string, object?> { ["CandidateCount"] = matches.Length });
-        return null;
-    }
-
-    private static bool MatchesSourcePath(PnPProjectDrawing drawing, string normalizedSource) =>
-        EquivalentPath(drawing.AbsoluteFileName, normalizedSource) ||
-        EquivalentPath(drawing.ResolvedFilePath, normalizedSource);
-
-    private static bool EquivalentPath(string? candidate, string normalizedSource)
-    {
-        if (string.IsNullOrWhiteSpace(candidate)) return false;
-        try { return string.Equals(Path.GetFullPath(candidate), normalizedSource, StringComparison.OrdinalIgnoreCase); }
-        catch { return false; }
-    }
-
-    private static void WriteOutcome(string code, OrthoViewportInfo? viewport, Exception? exception = null, IReadOnlyDictionary<string, object?>? details = null)
-    {
-        var sanitizedDetails = new Dictionary<string, object?>
-        {
-            ["SourceResolved"] = viewport?.SourceDrawingName is not null
-        };
-        if (details is not null) foreach (var detail in details) sanitizedDetails[detail.Key] = detail.Value;
-        RuntimeDiagnostics.Write("SourceDataLinksReadCompleted", code == "SOURCE_DATALINKS_READ" ? "INFO" : "WARNING", resultStatus: code, exception: exception, details: sanitizedDetails);
-    }
-
     private static string StableId(string drawingName, int rowId, string? className)
     {
         var hash = SHA256.HashData(Encoding.UTF8.GetBytes($"{drawingName}|{rowId}|{className}"));

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/RuntimeDiagnostics.cs

@@ -14,10 +14,6 @@ internal static class RuntimeDiagnostics
 
     public static string RuntimeMode => Environment.GetEnvironmentVariable("P_REC_ANNOT_RUNTIME_MODE") ?? "Normal";
 
-    public static bool IsOrthoStructureDiagnosticsEnabled =>
-        string.Equals(RuntimeMode, "DryRun", StringComparison.OrdinalIgnoreCase) &&
-        string.Equals(Environment.GetEnvironmentVariable("P_REC_ANNOT_DIAGNOSTICS"), "OrthoStructure", StringComparison.OrdinalIgnoreCase);
-
     public static void Write(
         string eventType,
         string level = "INFO",

Plant3D2026/P_Rec_Annot/tests/PRecAnnot.Core.Tests/FoundationTests.cs

@@ -104,37 +104,6 @@ public sealed class FoundationTests
         Assert.Equal(first.Operations.Select(x => x.SourceSnapshotId), second.Operations.Select(x => x.SourceSnapshotId));
     }
 
-    [Fact] public void AnnotationPlan_ReversedObjectOrder_HasSamePlanId()
-    {
-        var first = Build(Snapshot("a", "Pipe", "L-1"), Snapshot("b", "Pipe", "L-2"));
-        var second = Build(Snapshot("b", "Pipe", "L-2"), Snapshot("a", "Pipe", "L-1"));
-        Assert.Equal(first.PlanId, second.PlanId);
-        Assert.Equal(first.Summary, second.Summary);
-    }
-
-    [Fact] public void AnnotationPlan_AbsolutePath_DoesNotAffectPlanId()
-    {
-        var builder = new AnnotationPlanBuilder();
-        var item = Snapshot("a", "Pipe", "L-1");
-        var first = builder.Build(new AnnotationPlanningRequest { CommandName = "PHP_REC_ANNOT", Viewport = new OrthoViewportInfo { Id = "v", DisplayName = "v", SourceDrawingName = "C:\\one\\model.dwg" }, Objects = new[] { item } });
-        var second = builder.Build(new AnnotationPlanningRequest { CommandName = "PHP_REC_ANNOT", Viewport = new OrthoViewportInfo { Id = "v", DisplayName = "v", SourceDrawingName = "D:\\two\\model.dwg" }, Objects = new[] { item } });
-        Assert.Equal(first.PlanId, second.PlanId);
-    }
-
-    [Fact] public void AnnotationPlan_ChangedRelevantProperty_ChangesPlanId()
-    {
-        var first = Build(Snapshot("a", "Pipe", "L-1"));
-        var second = Build(Snapshot("a", "Pipe", "L-2"));
-        Assert.NotEqual(first.PlanId, second.PlanId);
-    }
-
-    [Fact] public void AnnotationPlan_UnresolvedMembership_IsStableSkip()
-    {
-        var plan = Build(new PlantObjectSnapshot { SnapshotId = "a", ObjectClass = "Pipe", LineNumber = "L-1", Geometry = new GeometrySnapshot(), MembershipStatus = ViewMembershipStatus.NotResolved });
-        Assert.Equal(AnnotationOperationKind.Skip, Assert.Single(plan.Operations).Kind);
-        Assert.Contains("VIEW_MEMBERSHIP_NOT_RESOLVED", plan.SkipReasons);
-    }
-
     [Fact] public void AnnotationPlan_MissingLineNumber_IsSkipped()
     {
         var plan = Build(Snapshot("a", "Pipe", null, null));
@@ -161,85 +130,6 @@ public sealed class FoundationTests
         Assert.Equal(AnnotationOperationKind.Conflict, plan.Operations.Last().Kind);
     }
 
-    [Fact] public void OrthoSourceResolver_OneView_ResolvesOneModelDrawing()
-    {
-        var result = new OrthoSourceDrawingResolver().Resolve(new OrthoDrawingSnapshot
-        {
-            StableId = "sheet",
-            Views = new[] { new OrthoViewSourceSnapshot { ViewStableId = "view", ReferencedDrawingPaths = new[] { "Plant 3D Models/TestPipeModel.dwg" } } }
-        });
-        var source = Assert.Single(result);
-        Assert.Equal(SourceDrawingResolutionStatus.Resolved, source.Status);
-        Assert.Equal("TestPipeModel.dwg", source.DisplayName);
-    }
-
-    [Fact] public void OrthoSourceResolver_DuplicateViews_DeduplicatesSource()
-    {
-        var result = new OrthoSourceDrawingResolver().Resolve(new OrthoDrawingSnapshot
-        {
-            StableId = "sheet",
-            Views = new[]
-            {
-                new OrthoViewSourceSnapshot { ViewStableId = "a", ReferencedDrawingPaths = new[] { "models/A.dwg" } },
-                new OrthoViewSourceSnapshot { ViewStableId = "b", ReferencedDrawingPaths = new[] { "models/A.dwg" } }
-            }
-        });
-        Assert.Single(result);
-    }
-
-    [Fact] public void OrthoSourceResolver_MissingSource_ReturnsDiagnostic()
-    {
-        var result = new OrthoSourceDrawingResolver().Resolve(new OrthoDrawingSnapshot { StableId = "sheet" });
-        var source = Assert.Single(result);
-        Assert.Equal(SourceDrawingResolutionStatus.NotReferenced, source.Status);
-        Assert.Contains("ORTHO_SOURCE_DRAWING_NOT_RESOLVED", source.EvidenceCodes);
-    }
-
-    [Fact] public void DwgQueryContract_UsesConfirmedModelFileContract()
-    {
-        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
-        Assert.Contains("view.DwgQuery?.ModelFiles", source);
-        Assert.Contains("file.ModelFileName", source);
-        Assert.Contains("ORTHO_MODEL_FILES_API_UNSUPPORTED", source);
-    }
-
-    [Fact] public void DwgQueryContract_DoesNotGuessAlternativePropertyNames()
-    {
-        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
-        Assert.DoesNotContain("GetProperty(\"ModelFileName\")", source);
-        Assert.DoesNotContain("GetProperty(\"Value\")", source);
-        Assert.DoesNotContain("GetProperty(\"FileName\")", source);
-    }
-
-    [Fact] public void OrthoSourceReader_UsesResolvedPipingProjectDrawingId()
-    {
-        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
-        Assert.Contains("pipingProject.GetPnPDrawingFiles()", source);
-        Assert.Contains("dataLinks.SelectAcPpRowIds(sourceDrawing.Id)", source);
-    }
-
-    [Fact] public void OrthoSourceReader_DoesNotQueryTheActiveOrthoDatabase()
-    {
-        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
-        Assert.DoesNotContain("SelectAcPpRowIds(sourceDatabase)", source);
-        Assert.DoesNotContain("ReadDwgFile(viewport.SourceDrawingName", source);
-    }
-
-    [Fact] public void OrthoSourceReader_ReportsDistinctSourceDiagnostics()
-    {
-        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
-        Assert.Contains("ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT", source);
-        Assert.Contains("SOURCE_DATALINKS_UNAVAILABLE", source);
-        Assert.Contains("SOURCE_DATALINKS_NO_ROWS", source);
-    }
-
-    [Fact] public void RuntimeInspector_IsDisabledByDefault()
-    {
-        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "RuntimeDiagnostics.cs"));
-        Assert.Contains("P_REC_ANNOT_DIAGNOSTICS", source);
-        Assert.Contains("OrthoStructure", source);
-    }
-
     [Fact] public void ApplyMode_IsBlocked() => Assert.Throws<InvalidOperationException>(() => new ExecutionModeWriteGuard(PRecAnnotExecutionMode.Apply).EnsureWriteAllowed("test"));
 
     [Fact] public void DryRunPath_HasNoForWriteOperations()
@@ -252,5 +142,5 @@ public sealed class FoundationTests
     }
 
     private static AnnotationPlan Build(params PlantObjectSnapshot[] objects) => new AnnotationPlanBuilder().Build(new AnnotationPlanningRequest { CommandName = "PHP_REC_ANNOT", Viewport = new OrthoViewportInfo { Id = "vp", DisplayName = "A", SourceDrawingName = "test.dwg" }, Objects = objects });
-    private static PlantObjectSnapshot Snapshot(string id, string type, string? line, string? tag = "TAG") => new() { SnapshotId = id, ObjectClass = type, LineNumber = line, Tag = tag, Geometry = new GeometrySnapshot { PaperPosition = new Point2Dto(1, 2) }, MembershipStatus = ViewMembershipStatus.Resolved };
+    private static PlantObjectSnapshot Snapshot(string id, string type, string? line, string? tag = "TAG") => new() { SnapshotId = id, ObjectClass = type, LineNumber = line, Tag = tag, Geometry = new GeometrySnapshot { PaperPosition = new Point2Dto(1, 2) } };
 }

migration/audits/p-rec-annot-legacy-loading/Invoke-LegacyLoadingAudit.ps1

@@ -0,0 +1,84 @@
+param(
+    [string]$DeployedRoot = '\\phpsrv03\NBIM\save\Apps\Plant3D\DriveA\P_Rec_Annot',
+    [string]$SourceRoot = '\\phpsrv03\NBIM\code\CS\P_Rec_Annot\v1.0.4\repo',
+    [string]$OutputRoot = (Split-Path -Parent $PSCommandPath)
+)
+
+Set-StrictMode -Version Latest
+$ErrorActionPreference = 'Stop'
+
+function Get-PeArchitecture([string]$Path) {
+    if ([IO.Path]::GetExtension($Path) -notin '.dll', '.exe') { return $null }
+    try {
+        $stream = [IO.File]::Open($Path, [IO.FileMode]::Open, [IO.FileAccess]::Read, [IO.FileShare]::ReadWrite)
+        try {
+            $reader = [IO.BinaryReader]::new($stream)
+            $stream.Position = 0x3c; $offset = $reader.ReadInt32(); $stream.Position = $offset + 4
+            $machine = $reader.ReadUInt16()
+            switch ($machine) { 0x14c { 'x86' } 0x8664 { 'x64' } 0x1c4 { 'ARM' } default { 'Unknown' } }
+        } finally { $stream.Dispose() }
+    } catch { 'Unreadable' }
+}
+
+function Get-AssemblyMetadata([string]$Path) {
+    $result = [ordered]@{ AssemblyName = $null; AssemblyVersion = $null; TargetFramework = $null }
+    if ([IO.Path]::GetExtension($Path) -ne '.dll') { return [pscustomobject]$result }
+    try {
+        $name = [Reflection.AssemblyName]::GetAssemblyName($Path)
+        $result.AssemblyName = $name.Name; $result.AssemblyVersion = $name.Version.ToString()
+        try {
+            $assembly = [Reflection.Assembly]::ReflectionOnlyLoadFrom($Path)
+            $attribute = $assembly.GetCustomAttributesData() | Where-Object { $_.AttributeType.FullName -eq 'System.Runtime.Versioning.TargetFrameworkAttribute' } | Select-Object -First 1
+            if ($attribute) { $result.TargetFramework = [string]$attribute.ConstructorArguments[0].Value }
+        } catch { }
+    } catch { }
+    [pscustomobject]$result
+}
+
+$inventory = foreach ($file in Get-ChildItem -LiteralPath $DeployedRoot -Recurse -File) {
+    $hash = Get-FileHash -LiteralPath $file.FullName -Algorithm SHA256
+    $version = try { [Diagnostics.FileVersionInfo]::GetVersionInfo($file.FullName) } catch { $null }
+    $meta = Get-AssemblyMetadata $file.FullName
+    [pscustomobject]@{
+        RelativePath = $file.FullName.Substring($DeployedRoot.Length).TrimStart('\')
+        Name = $file.Name; Extension = $file.Extension; Length = $file.Length; LastWriteTimeUtc = $file.LastWriteTimeUtc.ToString('o')
+        Sha256 = $hash.Hash; FileVersion = $version.FileVersion; ProductVersion = $version.ProductVersion
+        AssemblyName = $meta.AssemblyName; AssemblyVersion = $meta.AssemblyVersion; TargetFramework = $meta.TargetFramework
+        PeArchitecture = Get-PeArchitecture $file.FullName
+    }
+}
+$inventory | Sort-Object RelativePath | Export-Csv -LiteralPath (Join-Path $OutputRoot 'deployed-files.csv') -NoTypeInformation -Encoding utf8
+
+$settings = [xml](Get-Content -LiteralPath (Join-Path $DeployedRoot 'Settings.xml'))
+$sequence = 0
+$configuration = foreach ($item in $settings.Main.LoadAssemblies.LoadAssembly) {
+    $sequence++
+    $configured = [string]$item.assemblyname; $resolved = Join-Path $DeployedRoot $configured
+    $entry = $inventory | Where-Object Name -eq $configured | Select-Object -First 1
+    [pscustomobject]@{
+        Sequence = $sequence; ConfigFile = 'Settings.xml'; ConfiguredPath = $configured; ResolvedPath = ('<deployed-root>\' + $configured)
+        Assembly = $entry.AssemblyName; Exists = Test-Path -LiteralPath $resolved; Sha256 = $entry.Sha256
+        LoadMethod = 'acDoc.Editor.Command("._netload", fullPath)'; Required = $true
+        FailureBehavior = 'Outer loader catch stops remaining sequence and shows MessageBox'; Notes = 'Path is combined with OrthoLoader assembly directory.'
+    }
+}
+$configuration | Export-Csv -LiteralPath (Join-Path $OutputRoot 'configuration-map.csv') -NoTypeInformation -Encoding utf8
+
+$projects = Get-ChildItem -LiteralPath $SourceRoot -Recurse -File -Filter *.csproj | ForEach-Object {
+    $content = Get-Content -LiteralPath $_.FullName -Raw
+    $assemblyName = if ($content -match '<AssemblyName>([^<]+)</AssemblyName>') { $Matches[1] } else { [IO.Path]::GetFileNameWithoutExtension($_.Name) }
+    $framework = if ($content -match '<TargetFrameworkVersion>([^<]+)</TargetFrameworkVersion>') { $Matches[1] } else { $null }
+    $platform = if ($content -match '<PlatformTarget>([^<]+)</PlatformTarget>') { $Matches[1] } else { $null }
+    [pscustomobject]@{ AssemblyName = $assemblyName; Csproj = $_.FullName.Substring($SourceRoot.Length).TrimStart('\'); TargetFramework = $framework; PlatformTarget = $platform }
+}
+$sourceMap = foreach ($dll in $inventory | Where-Object Extension -eq '.dll') {
+    $matches = @($projects | Where-Object { $_.AssemblyName -eq $dll.AssemblyName -or $_.AssemblyName -eq [IO.Path]::GetFileNameWithoutExtension($dll.Name) })
+    $releaseCandidate = Join-Path (Join-Path $SourceRoot 'FilesRelease') $dll.Name
+    $exactReleaseMatch = (Test-Path -LiteralPath $releaseCandidate) -and ((Get-FileHash -LiteralPath $releaseCandidate -Algorithm SHA256).Hash -eq $dll.Sha256)
+    $status = if ($exactReleaseMatch) { 'EXACT_SOURCE_MATCH' } elseif ($matches.Count -eq 1) { 'LIKELY_SOURCE_MATCH' } elseif ($matches.Count -gt 1) { 'MULTIPLE_CANDIDATES' } elseif ($dll.Name -match '^PnP|^Ac') { 'AUTODESK_DEPENDENCY' } else { 'NO_SOURCE_FOUND' }
+    $project = $matches | Select-Object -First 1
+    [pscustomobject]@{ DeployedDll=$dll.Name; DeployedSha256=$dll.Sha256; FileVersion=$dll.FileVersion; AssemblyVersion=$dll.AssemblyVersion; LegacyProject=if($project){[IO.Path]::GetFileNameWithoutExtension($project.Csproj)}else{$null}; LegacyCsproj=if($project){$project.Csproj}else{$null}; LegacyOutputName=if($project){$project.AssemblyName}else{$null}; TargetFramework=if($project){$project.TargetFramework}else{$null}; PlatformTarget=if($project){$project.PlatformTarget}else{$null}; CommandCount=$null; RibbonRole=if($dll.AssemblyName -eq 'OrthoLoader'){'Central ribbon/loader'}else{$null}; ConfigurationSource=if($configuration.ConfiguredPath -contains $dll.Name){'Settings.xml'}else{$null}; MatchStatus=$status }
+}
+$sourceMap | Sort-Object DeployedDll | Export-Csv -LiteralPath (Join-Path $OutputRoot 'deployed-to-source-map.csv') -NoTypeInformation -Encoding utf8
+
+"GeneratedUtc=$([DateTime]::UtcNow.ToString('o'))`nDeployedRoot=<network root redacted to report context>`nSourceRoot=<network source root redacted to report context>`nFiles=$($inventory.Count)" | Set-Content -LiteralPath (Join-Path $OutputRoot 'evidence\generation.txt') -Encoding utf8

migration/audits/p-rec-annot-legacy-loading/README.md

@@ -0,0 +1,19 @@
+# Legacy P_Rec_Annot loading audit
+
+Scope: read-only inspection of the deployed network directory and the v1.0.4 source checkout. No legacy DLL was executed, copied, or deployed.
+
+The deployed root has 52 files, including 22 managed DLLs. `Settings.xml` enumerates 20 application modules. The inventory and its SHA-256 values are in `deployed-files.csv`; generated report paths use `<deployed-root>` rather than embedding a new runtime configuration path.
+
+High-confidence conclusion: the central loader is `OrthoLoader.dll`. `OrthoLoader.Ribbon.Initialize()` invokes `OrthoLoader.Initialize()`. The latter reads adjacent `Settings.xml` and calls `acDoc.Editor.Command("._netload", fullPath)` sequentially for the configured modules. The bootstrap that initially loads `OrthoLoader.dll` is not present in either audited directory; it remains unknown. Therefore the audit proves same-directory loading, but cannot prove whether an external launcher first NETLOADed the UNC copy or a local copy.
+
+Source-to-binary mapping is `EXACT_SOURCE_MATCH` for 15 deployed DLLs by SHA-256 against `FilesRelease`. Six newer deployed DLLs are `LIKELY_SOURCE_MATCH` by assembly/project identity and metadata but differ byte-for-byte from the checked-in release output. `InsertElevation.dll` is `MULTIPLE_CANDIDATES` because archival projects share the assembly identity.
+
+## Potential test data
+
+| RelativePath | Type | LikelyPurpose | ContainsProjectData | SafeForTest | Reason |
+|---|---|---|---|---|---|
+| `Template.dwg` | DWG | legacy command template | Unknown | No | Located beside production deployment; no authorization to open or copy it was established. |
+| `test.txt` | text | unknown/empty marker | No content | Not useful | Zero bytes. |
+| `Справка*.pdf/docx` | documentation | user instructions | Unknown | Review only | Not a CAD fixture. |
+
+No `Project.xml`, `.dcf`, or explicitly labelled sample/demo Ortho DWG was found in the deployed root.

migration/audits/p-rec-annot-legacy-loading/configuration-map.csv

@@ -0,0 +1,21 @@
+"Sequence","ConfigFile","ConfiguredPath","ResolvedPath","Assembly","Exists","Sha256","LoadMethod","Required","FailureBehavior","Notes"
+"1","Settings.xml","AnnotateLineNumbers.dll","<deployed-root>\AnnotateLineNumbers.dll","AnnotateLineNumbers","True","799BC277ED98BD870F01824180B5A945B24F016DFD9956A8CCC630AFE80FDFA4","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"2","Settings.xml","AutoAnnotateView.dll","<deployed-root>\AutoAnnotateView.dll","AutoAnnotateView","True","EAE55411EC84AC747A3816EE65CD095648282BE44235351E7C9ED1C188BCB611","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"3","Settings.xml","AutoLinenumberConnections.dll","<deployed-root>\AutoLinenumberConnections.dll","AutoLinenumberConnections","True","0F6B2A759F2A63B9152B480B6968BDA20F42AD1D922F67CA6E6BFD31A0715F35","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"4","Settings.xml","CheckOrthoView.dll","<deployed-root>\CheckOrthoView.dll","CheckOrthoView","True","89DB5E537C2BAEC292CDD8A0A43819119850119D54958E8CC3C43E2136AB24A0","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"5","Settings.xml","EnablerLoader.dll","<deployed-root>\EnablerLoader.dll","EnablerLoader","True","745D625C27F92842F2EFF3C515DB48BB9FC0FE59B6E4559ACD696BCC93FF4C51","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"6","Settings.xml","ExtentsIntersect.dll","<deployed-root>\ExtentsIntersect.dll","ExtentsIntersect","True","59D2776E083D4BE2FBFBE4F43009EAA9CE0E81A1752815B45C510F80654169D9","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"7","Settings.xml","GetComponentGeometry.dll","<deployed-root>\GetComponentGeometry.dll","GetComponentGeometry","True","9EA8C48FEC4D36D32CC6AC88B78C434662C16D4484F86EFAA46ECC309E9F9142","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"8","Settings.xml","GetLinenumberAnnotationText.dll","<deployed-root>\GetLinenumberAnnotationText.dll","GetLinenumberAnnotationText","True","047E721DBE380061D9ABDD92BC5475440E3B7ADB2BD0F544D538BA24B121D30E","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"9","Settings.xml","GetPlantScriptFolderPath.dll","<deployed-root>\GetPlantScriptFolderPath.dll","GetPlantScriptFolderPath","True","5080A167A1DAF6C19BE08F6CAB678D490736B5E07E121A918A2915F0D9D8BF65","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"10","Settings.xml","GetScriptParameters.dll","<deployed-root>\GetScriptParameters.dll","GetScriptParameters","True","7FF7B0D26BE8D89FF4A5A4FA1C6EC17BDA1506BCCB78AFE0E650137CD7BA5E87","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"11","Settings.xml","InsertElevation.dll","<deployed-root>\InsertElevation.dll","InsertElevation","True","B2D8B98F353D3DDF3A75A848E6922DC30478A1E5F98B372F24A049690492CA82","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"12","Settings.xml","LoadedAssemblies.dll","<deployed-root>\LoadedAssemblies.dll","LoadedAssemblies","True","277EB83C587A984DC2F558B8A7C86AA98E195A77AFA6FADD7DB83F2B801C0E4E","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"13","Settings.xml","OrthoAutoAnnotate.dll","<deployed-root>\OrthoAutoAnnotate.dll","OrthoAutoAnnotate","True","2E6BB2EBA0A98AA3550DFA4E661832FC7C3EE3DFF49BFC147BD4DFAD7A8596C6","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"14","Settings.xml","P3DCopyMissingObjectsToOrthoDrawing.dll","<deployed-root>\P3DCopyMissingObjectsToOrthoDrawing.dll","P3DCopyMissingObjectsToOrthoDrawing","True","6C879AFC7F35EC25E5E2FFF9FF0EE6EFEB155670DBFD5D0CDE9A0F629C5727B2","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"15","Settings.xml","P3DNewMa.dll","<deployed-root>\P3DNewMa.dll","P3DNewMa","True","97246EE9B24FD373551EF380C5AC0CA78CF7ED6A92581D5331B54445A2A948F8","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"16","Settings.xml","P3DSetLayerForViewport.dll","<deployed-root>\P3DSetLayerForViewport.dll","P3DSetLayerForViewport","True","A28E58FDE4EBAA26450CA646C5A85F98C1A04AA42C0BFC5413D718243ACBF42B","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"17","Settings.xml","PHPAnnotations.dll","<deployed-root>\PHPAnnotations.dll","PHPAnnotations","True","816A693F1B775C5506043DD0461055F248D3897E96AC8285DAE29C5B71FFCA73","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"18","Settings.xml","SwapAttributesMenuItem.dll","<deployed-root>\SwapAttributesMenuItem.dll","SwapAttributesMenuItem","True","674C865E34F9C877561E03E2077F7F2C6852C3C8B6A0503ACAA7619F3E80A460","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"19","Settings.xml","UpdateOrthoDrawings.dll","<deployed-root>\UpdateOrthoDrawings.dll","UpdateOrthoDrawings","True","1492FFF1F56853DF4A858CD3E926640C1E4920B5E3F5CFCC12F4389855E630BA","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."
+"20","Settings.xml","UpdateOrthoViewBlocks.dll","<deployed-root>\UpdateOrthoViewBlocks.dll","UpdateOrthoViewBlocks","True","5022D4D66D79E7E7D82F9FCB647DF8E1FE658A4694EB7794E363D5EA5517F5A9","acDoc.Editor.Command(""._netload"", fullPath)","True","Outer loader catch stops remaining sequence and shows MessageBox","Path is combined with OrthoLoader assembly directory."

migration/audits/p-rec-annot-legacy-loading/deployed-files.csv

@@ -0,0 +1,53 @@
+"RelativePath","Name","Extension","Length","LastWriteTimeUtc","Sha256","FileVersion","ProductVersion","AssemblyName","AssemblyVersion","TargetFramework","PeArchitecture"
+"AnnotateLineNumbers.dll","AnnotateLineNumbers.dll",".dll","126976","2024-12-13T07:41:34.0000000Z","799BC277ED98BD870F01824180B5A945B24F016DFD9956A8CCC630AFE80FDFA4","1.0.4.1","v1.0.4","AnnotateLineNumbers","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"AutoAnnotateView.dll","AutoAnnotateView.dll",".dll","49664","2025-02-10T07:47:43.4844455Z","EAE55411EC84AC747A3816EE65CD095648282BE44235351E7C9ED1C188BCB611","1.0.4.6","v1.0.4","AutoAnnotateView","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"AutoElevation.dll","AutoElevation.dll",".dll","28160","2025-01-16T08:13:32.2554341Z","A8766B73B30F8F44213769EB7824F82F73ED418DE0EF49695E00A3EB7FC28885","1.0.4.5","v1.0.4","AutoElevation","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"AutoLinenumberConnections.dll","AutoLinenumberConnections.dll",".dll","41472","2024-12-13T07:41:34.0000000Z","0F6B2A759F2A63B9152B480B6968BDA20F42AD1D922F67CA6E6BFD31A0715F35","1.0.4.1","v1.0.4","AutoLinenumberConnections","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"b455ee6eaed79d76f084846a60ce3284","b455ee6eaed79d76f084846a60ce3284","","0","2023-12-29T11:13:44.6409171Z","E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",,,,,,
+"CheckOrthoView.dll","CheckOrthoView.dll",".dll","14848","2024-12-13T07:41:34.0000000Z","89DB5E537C2BAEC292CDD8A0A43819119850119D54958E8CC3C43E2136AB24A0","1.0.4.1","v1.0.4","CheckOrthoView","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"EnablerLoader.dll","EnablerLoader.dll",".dll","6144","2024-12-13T07:41:34.0000000Z","745D625C27F92842F2EFF3C515DB48BB9FC0FE59B6E4559ACD696BCC93FF4C51","1.0.4.1","v1.0.4","EnablerLoader","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"ExtentsIntersect.dll","ExtentsIntersect.dll",".dll","6656","2024-12-13T07:41:34.0000000Z","59D2776E083D4BE2FBFBE4F43009EAA9CE0E81A1752815B45C510F80654169D9","1.0.4.1","v1.0.4","ExtentsIntersect","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"GetComponentGeometry.dll","GetComponentGeometry.dll",".dll","10240","2024-12-13T07:41:34.0000000Z","9EA8C48FEC4D36D32CC6AC88B78C434662C16D4484F86EFAA46ECC309E9F9142","1.0.4.1","v1.0.4","GetComponentGeometry","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"GetComponentGeometry.xml","GetComponentGeometry.xml",".xml","1239","2025-01-14T11:26:24.5054138Z","70169C3A3AAAFE5A2282E01D5B9B7C99F2F4FF9B7514553434302674ABE46C98",,,,,,
+"GetLinenumberAnnotationText.dll","GetLinenumberAnnotationText.dll",".dll","23040","2024-12-13T07:41:34.0000000Z","047E721DBE380061D9ABDD92BC5475440E3B7ADB2BD0F544D538BA24B121D30E","1.0.4.1","v1.0.4","GetLinenumberAnnotationText","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"GetPlantScriptFolderPath.dll","GetPlantScriptFolderPath.dll",".dll","4608","2024-12-13T07:41:34.0000000Z","5080A167A1DAF6C19BE08F6CAB678D490736B5E07E121A918A2915F0D9D8BF65","1.0.4.1","v1.0.4","GetPlantScriptFolderPath","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"GetScriptParameters.dll","GetScriptParameters.dll",".dll","6656","2024-12-13T07:41:34.0000000Z","7FF7B0D26BE8D89FF4A5A4FA1C6EC17BDA1506BCCB78AFE0E650137CD7BA5E87","1.0.4.1","v1.0.4","GetScriptParameters","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"ico\button_BJ.png","button_BJ.png",".png","1235","2024-12-13T07:41:34.0000000Z","414F0A23E917D41A82C697B0E9CDDDF9BFCACD1627310BD5717AEA172418AA51",,,,,,
+"ico\button_CAC.png","button_CAC.png",".png","1943","2024-12-13T07:41:34.0000000Z","FA2B8877F8B41C70BA62C737C40374394D6840A53DFE2D0B0F83463C4817C138",,,,,,
+"ico\button_PXP-AAV.png","button_PXP-AAV.png",".png","1905","2024-12-13T07:41:34.0000000Z","6AB171963B553B434B5AA4BFBE91993B1782606AAF9B486FA23BB27BC1F0E4AA",,,,,,
+"ico\button_PXP-AC.png","button_PXP-AC.png",".png","1751","2024-12-13T07:41:34.0000000Z","60A6BD62EF3E50BDDCD00D9C281F2399E6C9D42E0C2DAA1742273C0DC48FE9C3",,,,,,
+"ico\button_PXP-AE.png","button_PXP-AE.png",".png","2001","2024-12-13T07:41:34.0000000Z","F1DCF0E908F5AF38CCD13ABA58B824E5B186430414499C0F623C1D5EEAD8DAD7",,,,,,
+"ico\button_PXP-ALC.png","button_PXP-ALC.png",".png","1740","2024-12-13T07:41:34.0000000Z","19DB2449B66B95965155E6E3BC313BD52000FE38C95B0FAD90EF07DF53EA9CC9",,,,,,
+"ico\button_PXP-COV.png","button_PXP-COV.png",".png","2007","2024-12-13T07:41:34.0000000Z","529BDD045961C244FBD0DE177B899AF9E7CE0F4506B3463C56D2704B3BF207B5",,,,,,
+"ico\button_PXP-DAV.png","button_PXP-DAV.png",".png","1249","2025-01-28T06:29:03.3724433Z","A7932F2ABDAC652EA3A901A221AB3BE2BC80FCB76FB203D44FC63AF3681F51E3",,,,,,
+"ico\button_PXP-DJ.png","button_PXP-DJ.png",".png","1470","2024-12-13T07:41:34.0000000Z","127957752DC2B6573CD2FD9A2791914BA22802E07E9B7E23CD3AE1FFF9E4FFC4",,,,,,
+"ico\button_PXP-ELN.png","button_PXP-ELN.png",".png","1927","2024-12-13T07:41:34.0000000Z","DF32E6A465D5C196A17F3F96473315590DF2D71995F63D2D241D7599B62C99BB",,,,,,
+"ico\button_PXP-ESN.png","button_PXP-ESN.png",".png","1636","2024-12-13T07:41:34.0000000Z","0F089184CFD428DA3620F9C0AD2DCBFC21B31ED34FA301E8D5D45923783C0CC7",,,,,,
+"ico\button_PXP-IE.png","button_PXP-IE.png",".png","1885","2024-12-13T07:41:34.0000000Z","F1C6373BFAF82E1908AF371D5F21133D27E0B84AFC706A703530855A2046FE43",,,,,,
+"ico\button_PXP-IOD.png","button_PXP-IOD.png",".png","1942","2024-12-13T07:41:34.0000000Z","494E90C899A0BB5BB365B0E1452E92A68359610C5A38A37D09F520A39BDB3899",,,,,,
+"ico\button_PXP-LN.png","button_PXP-LN.png",".png","2024","2024-12-13T07:41:34.0000000Z","F3305ED6D266E29FA475D4C8A7DF38D2D2A1776A4CE379B876B6CFA278B2FE5D",,,,,,
+"ico\button_PXP-MA.png","button_PXP-MA.png",".png","1907","2024-12-13T07:41:34.0000000Z","9386249121644DCF4B9C70491F561E8B6E5BAAE87EBB2C76A84E46B10A60C8C3",,,,,,
+"ico\button_PXP-OA.png","button_PXP-OA.png",".png","1999","2024-12-13T07:41:34.0000000Z","EAA2AD7EE5C6B7F3716AF1D7690C76AE59229AE9B6BA02009F5009CD9307F4E8",,,,,,
+"ico\button_PXP-OSI.png","button_PXP-OSI.png",".png","1508","2024-12-13T07:41:34.0000000Z","422D10B6EBDD76085CF9C5985391CCA060464B200D6792D604658AAE47F12CEE",,,,,,
+"ico\button_PXP-RA.png","button_PXP-RA.png",".png","1826","2024-12-13T07:41:34.0000000Z","1DB3F39C6CCA4EABE79D81DE6DCF9900649CDC9064F2EBF5E45F9AD849B8317F",,,,,,
+"ico\button_PXP-RMP.png","button_PXP-RMP.png",".png","1759","2024-12-13T07:41:34.0000000Z","156026EC6DEB7BDBE720047409E9A25615D650D8634C2F0BAF49A71E27135258",,,,,,
+"ico\button_PXP-ULN.png","button_PXP-ULN.png",".png","1928","2024-12-13T07:41:34.0000000Z","B37EBB460691EAA7BC3A91DF05C27FE7CC1F0E9F9D69BDA7703956EAA7AA785C",,,,,,
+"ico\button_PXP-UOB.png","button_PXP-UOB.png",".png","1569","2024-12-13T07:41:34.0000000Z","3BC16B9923CCD34CF10F403CD65732B217E255E89539174841E7F30D9DFD2DCD",,,,,,
+"InsertElevation.dll","InsertElevation.dll",".dll","24576","2025-01-16T08:13:32.2504470Z","B2D8B98F353D3DDF3A75A848E6922DC30478A1E5F98B372F24A049690492CA82","1.0.4.5","v1.0.4","InsertElevation","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"LoadedAssemblies.dll","LoadedAssemblies.dll",".dll","4608","2024-12-13T07:41:34.0000000Z","277EB83C587A984DC2F558B8A7C86AA98E195A77AFA6FADD7DB83F2B801C0E4E","1.0.4.1","v1.0.4","LoadedAssemblies","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"OrthoAutoAnnotate.dll","OrthoAutoAnnotate.dll",".dll","108544","2025-02-10T07:45:33.3280516Z","2E6BB2EBA0A98AA3550DFA4E661832FC7C3EE3DFF49BFC147BD4DFAD7A8596C6","1.0.4.6","v1.0.4","OrthoAutoAnnotate","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"OrthoLoader.dll","OrthoLoader.dll",".dll","18944","2025-02-24T06:59:01.9094468Z","D418F2CBDD134C0156E2D332BD7F9ED471B9A1E0581FE42EDF98BBE01CB3345D","1.0.4.7","v1.0.4","OrthoLoader","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"P3DCopyMissingObjectsToOrthoDrawing.dll","P3DCopyMissingObjectsToOrthoDrawing.dll",".dll","14336","2024-12-13T07:41:34.0000000Z","6C879AFC7F35EC25E5E2FFF9FF0EE6EFEB155670DBFD5D0CDE9A0F629C5727B2","1.0.4.1","v1.0.4","P3DCopyMissingObjectsToOrthoDrawing","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"P3DNewMa.dll","P3DNewMa.dll",".dll","103936","2025-02-24T06:59:03.1350320Z","97246EE9B24FD373551EF380C5AC0CA78CF7ED6A92581D5331B54445A2A948F8","1.0.4.7","v1.0.4","P3DNewMa","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"P3DSetLayerForViewport.dll","P3DSetLayerForViewport.dll",".dll","4608","2024-12-13T07:41:34.0000000Z","A28E58FDE4EBAA26450CA646C5A85F98C1A04AA42C0BFC5413D718243ACBF42B","1.0.4.1","v1.0.4","P3DSetLayerForViewport","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"PHPAnnotations.dll","PHPAnnotations.dll",".dll","69120","2024-12-13T07:41:34.0000000Z","816A693F1B775C5506043DD0461055F248D3897E96AC8285DAE29C5B71FFCA73","1.0.4.1","v1.0.4","PHPAnnotations","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"Settings.xml","Settings.xml",".xml","136576","2025-01-31T07:28:24.1891507Z","AFEDC7526923ACE1DC60374F98F171809B36992262A37E1F11828F2B8D9799CB",,,,,,
+"SwapAttributesMenuItem.dll","SwapAttributesMenuItem.dll",".dll","11264","2024-12-13T07:41:34.0000000Z","674C865E34F9C877561E03E2077F7F2C6852C3C8B6A0503ACAA7619F3E80A460","1.0.4.1","v1.0.4","SwapAttributesMenuItem","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"Template.dwg","Template.dwg",".dwg","148438","2025-01-30T13:16:13.0000000Z","EA279A30F113660CF53585451083BAEB0A01CA58C8F9A767C4B7C2A5E66ECCA3",,,,,,
+"test.txt","test.txt",".txt","0","2025-01-16T09:56:52.0597137Z","E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",,,,,,
+"UpdateOrthoDrawings.dll","UpdateOrthoDrawings.dll",".dll","45568","2025-02-24T06:59:02.4829428Z","1492FFF1F56853DF4A858CD3E926640C1E4920B5E3F5CFCC12F4389855E630BA","1.0.4.2","v1.0.4","UpdateOrthoDrawings","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"UpdateOrthoViewBlocks.dll","UpdateOrthoViewBlocks.dll",".dll","15360","2024-12-13T07:41:34.0000000Z","5022D4D66D79E7E7D82F9FCB647DF8E1FE658A4694EB7794E363D5EA5517F5A9","1.0.4.1","v1.0.4","UpdateOrthoViewBlocks","1.0.4.0",".NETFramework,Version=v4.7","x64"
+"Справка по работе с палитрой.docx","Справка по работе с палитрой.docx",".docx","855301","2025-02-05T09:53:08.1186958Z","B6DC65BA17C4EA79DBCCC501909BEDBF56EB6A9F1E24BFAD1B01158B6EC639D0",,,,,,
+"Справка по работе с палитрой.pdf","Справка по работе с палитрой.pdf",".pdf","744035","2025-02-05T09:53:21.3752687Z","332CA70D3264C28BC712CA790157D0CD03BE7E07F42603DAF9247600271B7B75",,,,,,
+"Справка.docx","Справка.docx",".docx","87889","2025-02-06T05:13:36.4991443Z","14BA9BD252FB6DF37C4D151787E8799AB1703847C1DEC24F3EFE4D6805B0EB12",,,,,,
+"Справка.pdf","Справка.pdf",".pdf","154074","2025-02-06T05:14:24.2809131Z","EB840514755A9F56ABC8351B8EC41233FE2512118DB2D4BA0ACD46E74D2C7DC9",,,,,,

migration/audits/p-rec-annot-legacy-loading/deployed-to-source-map.csv

@@ -0,0 +1,23 @@
+"DeployedDll","DeployedSha256","FileVersion","AssemblyVersion","LegacyProject","LegacyCsproj","LegacyOutputName","TargetFramework","PlatformTarget","CommandCount","RibbonRole","ConfigurationSource","MatchStatus"
+"AnnotateLineNumbers.dll","799BC277ED98BD870F01824180B5A945B24F016DFD9956A8CCC630AFE80FDFA4","1.0.4.1","1.0.4.0","AnnotateLineNumbers","AnnotateLineNumbers\AnnotateLineNumbers.csproj","AnnotateLineNumbers","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"AutoAnnotateView.dll","EAE55411EC84AC747A3816EE65CD095648282BE44235351E7C9ED1C188BCB611","1.0.4.6","1.0.4.0","AutoAnnotateView","AutoAnnotateView\AutoAnnotateView.csproj","AutoAnnotateView","v4.7","x64",,,"Settings.xml","LIKELY_SOURCE_MATCH"
+"AutoElevation.dll","A8766B73B30F8F44213769EB7824F82F73ED418DE0EF49695E00A3EB7FC28885","1.0.4.5","1.0.4.0","AutoElevation","AutoElevation\AutoElevation.csproj","AutoElevation","v4.7","x64",,,,"LIKELY_SOURCE_MATCH"
+"AutoLinenumberConnections.dll","0F6B2A759F2A63B9152B480B6968BDA20F42AD1D922F67CA6E6BFD31A0715F35","1.0.4.1","1.0.4.0","AutoLinenumberConnections","AutoLinenumberConnections\AutoLinenumberConnections.csproj","AutoLinenumberConnections","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"CheckOrthoView.dll","89DB5E537C2BAEC292CDD8A0A43819119850119D54958E8CC3C43E2136AB24A0","1.0.4.1","1.0.4.0","CheckOrthoView","CheckOrthoView\CheckOrthoView.csproj","CheckOrthoView","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"EnablerLoader.dll","745D625C27F92842F2EFF3C515DB48BB9FC0FE59B6E4559ACD696BCC93FF4C51","1.0.4.1","1.0.4.0","EnablerLoader","EnablerLoader\EnablerLoader.csproj","EnablerLoader","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"ExtentsIntersect.dll","59D2776E083D4BE2FBFBE4F43009EAA9CE0E81A1752815B45C510F80654169D9","1.0.4.1","1.0.4.0","ExtentsIntersect","ExtentsIntersect\ExtentsIntersect.csproj","ExtentsIntersect","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"GetComponentGeometry.dll","9EA8C48FEC4D36D32CC6AC88B78C434662C16D4484F86EFAA46ECC309E9F9142","1.0.4.1","1.0.4.0","GetComponentGeometry","GetComponentGeometry\GetComponentGeometry.csproj","GetComponentGeometry","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"GetLinenumberAnnotationText.dll","047E721DBE380061D9ABDD92BC5475440E3B7ADB2BD0F544D538BA24B121D30E","1.0.4.1","1.0.4.0","GetLinenumberAnnotationText","GetLinenumberAnnotationText\GetLinenumberAnnotationText.csproj","GetLinenumberAnnotationText","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"GetPlantScriptFolderPath.dll","5080A167A1DAF6C19BE08F6CAB678D490736B5E07E121A918A2915F0D9D8BF65","1.0.4.1","1.0.4.0","GetPlantScriptFolderPath","GetPlantScriptFolderPath\GetPlantScriptFolderPath.csproj","GetPlantScriptFolderPath","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"GetScriptParameters.dll","7FF7B0D26BE8D89FF4A5A4FA1C6EC17BDA1506BCCB78AFE0E650137CD7BA5E87","1.0.4.1","1.0.4.0","GetScriptParameters","GetScriptParameters\GetScriptParameters.csproj","GetScriptParameters","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"InsertElevation.dll","B2D8B98F353D3DDF3A75A848E6922DC30478A1E5F98B372F24A049690492CA82","1.0.4.5","1.0.4.0","InsertElevation","InsertElevation\InsertElevation.csproj","InsertElevation","v4.7","x64",,,"Settings.xml","MULTIPLE_CANDIDATES"
+"LoadedAssemblies.dll","277EB83C587A984DC2F558B8A7C86AA98E195A77AFA6FADD7DB83F2B801C0E4E","1.0.4.1","1.0.4.0","LoadedAssemblies","LoadedAssemblies\LoadedAssemblies.csproj","LoadedAssemblies","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"OrthoAutoAnnotate.dll","2E6BB2EBA0A98AA3550DFA4E661832FC7C3EE3DFF49BFC147BD4DFAD7A8596C6","1.0.4.6","1.0.4.0","OrthoAutoAnnotate","OrthoAutoAnnotate\OrthoAutoAnnotate.csproj","OrthoAutoAnnotate","v4.7","x64",,,"Settings.xml","LIKELY_SOURCE_MATCH"
+"OrthoLoader.dll","D418F2CBDD134C0156E2D332BD7F9ED471B9A1E0581FE42EDF98BBE01CB3345D","1.0.4.7","1.0.4.0","OrthoLoader","OrthoLoader\OrthoLoader.csproj","OrthoLoader","v4.7","x64",,"Central ribbon/loader",,"LIKELY_SOURCE_MATCH"
+"P3DCopyMissingObjectsToOrthoDrawing.dll","6C879AFC7F35EC25E5E2FFF9FF0EE6EFEB155670DBFD5D0CDE9A0F629C5727B2","1.0.4.1","1.0.4.0","P3DCopyMissingObjectsToOrthoDrawing","P3DCopyMissingObjectsToOrthoDrawing\P3DCopyMissingObjectsToOrthoDrawing.csproj","P3DCopyMissingObjectsToOrthoDrawing","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"P3DNewMa.dll","97246EE9B24FD373551EF380C5AC0CA78CF7ED6A92581D5331B54445A2A948F8","1.0.4.7","1.0.4.0","P3DNewMa","P3DNewMa\P3DNewMa.csproj","P3DNewMa","v4.7","x64",,,"Settings.xml","LIKELY_SOURCE_MATCH"
+"P3DSetLayerForViewport.dll","A28E58FDE4EBAA26450CA646C5A85F98C1A04AA42C0BFC5413D718243ACBF42B","1.0.4.1","1.0.4.0","P3DSetLayerForViewport","P3DSetLayerForViewport\P3DSetLayerForViewport.csproj","P3DSetLayerForViewport","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"PHPAnnotations.dll","816A693F1B775C5506043DD0461055F248D3897E96AC8285DAE29C5B71FFCA73","1.0.4.1","1.0.4.0","PHPAnnotations","PHPAnnotations\PHPAnnotations.csproj","PHPAnnotations","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"SwapAttributesMenuItem.dll","674C865E34F9C877561E03E2077F7F2C6852C3C8B6A0503ACAA7619F3E80A460","1.0.4.1","1.0.4.0","SwapAttributesMenuItem","SwapAttributesMenuItem\SwapAttributesMenuItem.csproj","SwapAttributesMenuItem","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"
+"UpdateOrthoDrawings.dll","1492FFF1F56853DF4A858CD3E926640C1E4920B5E3F5CFCC12F4389855E630BA","1.0.4.2","1.0.4.0","UpdateOrthoDrawings","UpdateOrthoDrawings\UpdateOrthoDrawings.csproj","UpdateOrthoDrawings","v4.7","x64",,,"Settings.xml","LIKELY_SOURCE_MATCH"
+"UpdateOrthoViewBlocks.dll","5022D4D66D79E7E7D82F9FCB647DF8E1FE658A4694EB7794E363D5EA5517F5A9","1.0.4.1","1.0.4.0","UpdateOrthoViewBlocks","UpdateOrthoViewBlocks\UpdateOrthoViewBlocks.csproj","UpdateOrthoViewBlocks","v4.7","x64",,,"Settings.xml","EXACT_SOURCE_MATCH"

migration/audits/p-rec-annot-legacy-loading/evidence/generation.txt

@@ -0,0 +1,4 @@
+GeneratedUtc=2026-07-31T10:39:04.9899963Z
+DeployedRoot=<network root redacted to report context>
+SourceRoot=<network source root redacted to report context>
+Files=52

migration/audits/p-rec-annot-legacy-loading/legacy-vs-new-loading.md

@@ -0,0 +1,13 @@
+# Legacy versus new loading model
+
+| Legacy behavior | Legacy evidence | New implementation | Compatibility requirement | Decision | Risk |
+|---|---|---|---|---|---|
+| Unknown external bootstrap loads `OrthoLoader.dll` | `loading-chain.md` | Bundle bootstrap not selected yet | Identify the workstation/project startup owner first | Defer loading-model decision | High |
+| 20 independent DLLs loaded in order | `Settings.xml`, `Loader.cs:63-81` | one entry assembly currently | Preserve required command availability, not the DLL count | Evaluate command/module migration individually | Medium |
+| DLLs loaded from OrthoLoader's directory (possibly UNC) | `Loader.cs:49,65`; bootstrap source unknown | local smoke bundle only | Decide offline/update policy with operations owner | Do not hard-code UNC in new code | High |
+| Settings.xml controls order | `Loader.cs:104-112` | MSBuild/bundle manifest currently | Preserve explicit dependency ordering where behavior requires it | Document, do not emulate blindly | Medium |
+| central PluginsOrtho Ribbon | `Ribbon.cs` | new Promhimproekt tab | Preserve actual command mapping where adopted | Separate UI migration decision | Medium |
+| project selection uses local app_netload.lsp | `Ribbon.cs:380-405` | no equivalent | Confirm security/project-selection policy | Do not reproduce hidden local control file | High |
+| network icons and documents | `Ribbon.cs:330-357`, deployed files | bundle resources | Bundle only licensed, necessary resources | Replace network runtime dependency | Medium |
+
+Recommendation: do not choose AppLoader or a manual-NETLOAD model yet. First identify the missing external bootstrap and confirm whether `app_netload.lsp` is the corporate launcher contract. Once confirmed, use a single versioned entry assembly with explicit manifest/dependency validation; avoid sequential programmatic NETLOAD and UNC execution because the legacy chain is non-atomic and fails the remaining modules after one error.

migration/audits/p-rec-annot-legacy-loading/loading-chain.md

@@ -0,0 +1,29 @@
+# Proven legacy loading chain
+
+```text
+Unknown external bootstrap
+  -> NETLOAD of deployed OrthoLoader.dll (not evidenced in audited directories)
+  -> OrthoLoader.Ribbon.Initialize()
+  -> subscribe ComponentManager.ItemInitialized
+  -> OrthoLoader.Initialize()
+  -> adjacent Settings.xml / Main/LoadAssemblies/LoadAssembly
+  -> sequential acDoc.Editor.Command("._netload", fullPath) for 20 DLLs
+  -> each DLL exposes CommandMethod commands
+  -> Ribbon ItemInitialized creates PluginsOrtho tab and command buttons
+```
+
+| Claim | Evidence | Confidence |
+|---|---|---|
+| Central loader is `OrthoLoader.dll` | `OrthoLoader/Ribbon.cs:151-156`; deployed DLL metadata and `Settings.xml` | High |
+| Module list is read from adjacent `Settings.xml` | `OrthoLoader/Loader.cs:104-112` | High |
+| Module loading is programmatic `._netload`, in XML order | `OrthoLoader/Loader.cs:63-81`; `configuration-map.csv` | High |
+| Full DLL path is loader directory + configured filename | `OrthoLoader/Loader.cs:49, 65` | High |
+| Modules load from the same directory as OrthoLoader | `Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location)` in `Loader.cs:49,65` | High |
+| Modules loaded directly from UNC | true only if external bootstrap NETLOADed the deployed UNC copy; bootstrap is outside audit scope | Unknown |
+| Missing/failed module stops later loading and shows MessageBox | single outer try/catch around the loop, `Loader.cs:63-99` | High |
+| Ribbon owner is OrthoLoader | `OrthoLoader/Ribbon.cs:16-19,151-172,193-321` | High |
+| Initial bootstrap mechanism | no LISP/CUI/ARG/REG/PackageContents file found in either audited directory | Unknown |
+
+`Assembly.LoadFrom` occurs inside several legacy command implementations for secondary dependencies. It is not the mechanism used by `OrthoLoader` to load its configured modules. `EnablerLoader` separately uses `Assembly.LoadFile` for the Plant enabler from the host base directory.
+
+No `PackageContents.xml`, `*.bundle`, registry demand-load registration, LISP, CUI, MNL, script, batch, or PowerShell bootstrap was found in the audited locations. This proves absence only within audit scope; it does not prove the workstation bootstrap did not exist elsewhere.

migration/audits/p-rec-annot-legacy-loading/runtime-dependencies.csv

@@ -0,0 +1,10 @@
+Dependency,Category,Evidence,Requiredness,Notes
+Settings.xml,CONFIGURATION,OrthoLoader/Loader.cs:104-112,Required,Adjacent to each loaded assembly directory
+ico/*.png,RIBBON_RESOURCE,OrthoLoader/Ribbon.cs:330-357,Optional,Missing file yields null image
+app_netload.lsp,CONFIGURATION,OrthoLoader/Ribbon.cs:380-405,Implicit,Local workstation file gates project-specific Ribbon enablement
+annotation_settings.xml,REFERENCE_DATA,README.md and annotation modules,Project-dependent,Located in Plant project data area according to README
+users_indexes_list.xml,REFERENCE_DATA,README.md and annotation modules,Project-dependent,Located in Plant project data area according to README
+Template.dwg,TEMPLATE,Deployed inventory and legacy source references,Command-dependent,Do not treat deployed copy as approved test fixture
+Plant project XML/DWG,COMMAND_TIME,UpdateOrthoDrawings and annotation source,Required by relevant command,Out of deployed plugin root
+Update report CSV,LOGGING,UpdateOrthoDrawings/Commands.cs:1004,Optional,Written beside executing assembly by legacy command
+Help PDFs,RIBBON_RESOURCE,P3DNewMa/NewMaControl.cs:6214,Optional,Opened from assembly directory

migration/audits/p-rec-annot-legacy-loading/user-workflow.md

@@ -0,0 +1,9 @@
+# Observed user workflow
+
+After an external bootstrap loaded `OrthoLoader.dll`, the loader created a `PluginsOrtho` Ribbon tab only when `isProjectCorrect` accepted the current Plant project. That predicate reads the first line of the local file `C:\AutoCAD User Support\Applications\app_netload.lsp` and compares its encoded project root with the active Plant project (`OrthoLoader/Ribbon.cs:380-405`).
+
+`PluginsOrtho` has eight panels. Button IDs are commands; clicks call `Document.SendStringToExecute(command + "\n", ...)` (`Ribbon.cs:193-321, 526-529`). Examples: `PXP-AAV` is registered by `AutoAnnotateView/Commands.cs:546`; `PXP-OA` by `OrthoAutoAnnotate/Commands.cs:6444`.
+
+The deployed `ico/*.png` files are runtime Ribbon resources. They are resolved from the loader assembly directory; in this deployment that is the UNC directory. The code has a null-image fallback when an icon is absent.
+
+The tab and panels use stable IDs and lookup before creation. Button collections are appended when a missing panel is created; repeated project-open events can enable existing UI or create absent UI. The event is detached after first Ribbon initialization, but `CurrentProjectOpenedEvent` is retained for the process lifetime.