{
    "schemaVersion":  1,
    "scope":  "Plant 3D P_Rec_Annot active command slice generated from audited non-archive command registrations. This is a ledger foundation, not a claim of complete ecosystem inventory.",
    "source":  "migration/audits/p-rec-annot-v1.0.4/evidence/commands.csv",
    "capabilities":  [
                         {
                             "id":  "PLANT3D-2019-CMD-BJ",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "PHPAnnotations\\PHPBlockJig.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: BJ",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-CAC",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "PHPAnnotations\\PHPAnnotations.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: CAC",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-CAC1",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "P3DNewMa\\NewMaControl.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: CAC1",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-CREATEANNOTATIONCOMMAND",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "PHPAnnotations\\PHPAnnotations.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: CreateAnnotationCommand",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-MTO-MA",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "P3DNewMa\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: mto-ma",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-MTO-MA1",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "P3DNewMa\\NewMaControl.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: mto-ma1",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-AAV",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AutoAnnotateView\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-AAV",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "PRecAnnot.Plant3D2026",
                             "owner":  "Plant annotation domain owner",
                             "migrationStatus":  "RUNTIME_VERIFIED",
                             "verificationMethod":  "Controlled Plant 3D 2026 Preview/Apply/repeated Apply/UNDO runtime acceptance",
                             "runtimeEvidence":  "Accepted runtime session 7402fee6290b44438642f9204e8bdb6c; automation journal 0cf74ff1c90d4c69a10417904638c7b6",
                             "knownDifferences":  "2026 implementation uses local immutable package staging and managed entry assembly; legacy loading mechanics are not retained.",
                             "decision":  "MIGRATED_RUNTIME_VERIFIED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-AC",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "SwapAttributesMenuItem\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-AC",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-AE",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AutoElevation\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-AE",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-ALC",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AutoLinenumberConnections\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-ALC",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-COV",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "CheckOrthoView\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-COV",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-DJ",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-DJ",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-ELN",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-ELN",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-ESN",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-ESN",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-GIT",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "ExtentsIntersect\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-GIT",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-IE",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "InsertElevation\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-IE",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-IOD",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "UpdateOrthoDrawings\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-IOD",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-LN",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-LN",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-MA",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "PHPAnnotations\\PHPAnnotations.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-MA",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-OA",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-OA",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "PRecAnnot.Plant3D2026",
                             "owner":  "Plant annotation domain owner",
                             "migrationStatus":  "RUNTIME_VERIFIED",
                             "verificationMethod":  "Controlled Plant 3D 2026 Preview/Apply/repeated Apply/UNDO runtime acceptance",
                             "runtimeEvidence":  "Accepted runtime session 7402fee6290b44438642f9204e8bdb6c; automation journal 0cf74ff1c90d4c69a10417904638c7b6",
                             "knownDifferences":  "2026 implementation uses local immutable package staging and managed entry assembly; legacy loading mechanics are not retained.",
                             "decision":  "MIGRATED_RUNTIME_VERIFIED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-OSI",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-OSI",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-RA",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-RA",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-RMP",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-RMP",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-ULN",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-ULN",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         },
                         {
                             "id":  "PLANT3D-2019-CMD-PXP-UOB",
                             "sourceProduct":  "Autodesk Plant 3D 2019",
                             "sourceComponent":  "UpdateOrthoViewBlocks\\Commands.cs",
                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
                             "launchMethod":  "AutoCAD command: PXP-UOB",
                             "dependencies":  [
                                                  "Plant 3D drawing",
                                                  "P_Rec_Annot legacy module"
                                              ],
                             "resources":  [
                                               "Project configuration",
                                               "Drawing and annotation resources"
                                           ],
                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
                             "legacyStatus":  "ACTIVE_LEGACY",
                             "targetComponent":  "UNASSIGNED",
                             "owner":  "UNASSIGNED",
                             "migrationStatus":  "MIGRATION_PLANNED",
                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
                             "runtimeEvidence":  "NOT REPORTED",
                             "knownDifferences":  "NOT ASSESSED",
                             "decision":  "MIGRATION_REQUIRED"
                         }
                     ]
}