fix: remove generated p-rec-update artifacts

Plant3D2026/P_Rec_Update/Directory.Build.props

@@ -0,0 +1,13 @@
+<Project>
+  <PropertyGroup>
+    <Nullable>enable</Nullable>
+    <ImplicitUsings>enable</ImplicitUsings>
+    <LangVersion>latest</LangVersion>
+    <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+    <Deterministic>true</Deterministic>
+    <DebugType>portable</DebugType>
+    <AutoCAD2026ManagedDir Condition="'$(AutoCAD2026ManagedDir)' == '' and '$(Plant3D2026InstallDir)' != ''">$(Plant3D2026InstallDir)</AutoCAD2026ManagedDir>
+    <Plant3D2026ManagedDir Condition="'$(Plant3D2026ManagedDir)' == '' and '$(Plant3D2026InstallDir)' != ''">$(Plant3D2026InstallDir)\PLNT3D</Plant3D2026ManagedDir>
+    <Plant3D2026InstallDir Condition="'$(Plant3D2026InstallDir)' == '' and '$(AutoCAD2026ManagedDir)' != ''">$(AutoCAD2026ManagedDir)</Plant3D2026InstallDir>
+  </PropertyGroup>
+</Project>

Plant3D2026/P_Rec_Update/PRecUpdate2026.sln

@@ -0,0 +1,30 @@
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 17
+VisualStudioVersion = 17.0.31903.59
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PRecUpdate.Core", "src\PRecUpdate.Core\PRecUpdate.Core.csproj", "{20000000-0000-0000-0000-000000000001}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PRecUpdate.Plant3D2026", "src\PRecUpdate.Plant3D2026\PRecUpdate.Plant3D2026.csproj", "{20000000-0000-0000-0000-000000000002}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PRecUpdate.Core.Tests", "tests\PRecUpdate.Core.Tests\PRecUpdate.Core.Tests.csproj", "{20000000-0000-0000-0000-000000000003}"
+EndProject
+Global
+  GlobalSection(SolutionConfigurationPlatforms) = preSolution
+    Debug|Any CPU = Debug|Any CPU
+    Release|Any CPU = Release|Any CPU
+  EndGlobalSection
+  GlobalSection(ProjectConfigurationPlatforms) = postSolution
+    {20000000-0000-0000-0000-000000000001}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+    {20000000-0000-0000-0000-000000000001}.Debug|Any CPU.Build.0 = Debug|Any CPU
+    {20000000-0000-0000-0000-000000000001}.Release|Any CPU.ActiveCfg = Release|Any CPU
+    {20000000-0000-0000-0000-000000000001}.Release|Any CPU.Build.0 = Release|Any CPU
+    {20000000-0000-0000-0000-000000000002}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+    {20000000-0000-0000-0000-000000000002}.Debug|Any CPU.Build.0 = Debug|Any CPU
+    {20000000-0000-0000-0000-000000000002}.Release|Any CPU.ActiveCfg = Release|Any CPU
+    {20000000-0000-0000-0000-000000000002}.Release|Any CPU.Build.0 = Release|Any CPU
+    {20000000-0000-0000-0000-000000000003}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+    {20000000-0000-0000-0000-000000000003}.Debug|Any CPU.Build.0 = Debug|Any CPU
+    {20000000-0000-0000-0000-000000000003}.Release|Any CPU.ActiveCfg = Release|Any CPU
+    {20000000-0000-0000-0000-000000000003}.Release|Any CPU.Build.0 = Release|Any CPU
+  EndGlobalSection
+EndGlobal

Plant3D2026/P_Rec_Update/docs/capability-contract.md

@@ -0,0 +1,27 @@
+# P_Rec_Update capability contract
+
+Selected legacy provenance is `\\phpsrv03\NBIM\code\CS\P_Rec_Update\P_Rec_Update\P_Rec_Update.csproj`
+(SHA-256 `1945B572CEE3A308320C164549D38C95C4ED40183347CE341ACD481ED3895BFD`). It is the
+expanded successor to the 2023 `_v2.1` line: it exposes `P-R-UPD`, initializes an
+Update ribbon panel, and presents four selectable operations in `Main_Form`.
+
+| Source-backed operation | Legacy effects | 2026 status |
+|---|---|---|
+| Project NKR | reads project XML and `Settings_NKR.xml`; updates NKR-related project data | DryRun plan and preconditions implemented; Apply blocked |
+| Flanges | reads Piping DataLinks and geometry; may update support/flange-related data | DryRun plan and preconditions implemented; Apply blocked |
+| Fasteners | reads EngineeringItems and may update ItemCode values | DryRun plan and preconditions implemented; Apply blocked |
+| Project Spec | reads spec/project database and may update `LinearWeight` | DryRun plan and preconditions implemented; Apply blocked |
+
+The 2026 entry assembly preserves `P-R-UPD` and adds `P-R-UPD-STATUS` for a
+non-mutating controlled registration check. It is deterministic and refuses an
+Apply-capable plan without an explicit controlled-fixture permit.
+
+## Exact dependency blocker for domain Apply
+
+The legacy code directly binds Plant 2019 DataLinks/SQLite schemas, the external
+`GetComponentGeometryDescription.dll`, package-local `Settings_Flanges.xml` /
+`Settings_NKR.xml`, and a hard-coded legacy template path. No controlled Plant 2026
+fixture containing the required Piping rows, EngineeringItems/spec records and
+expected post-state has been supplied. Therefore domain mutation is intentionally
+not attempted. This is `EXACT_DEPENDENCY_BLOCKER`, not a claim of completed Apply
+parity. Assembly load and command registration remain independently verifiable.

Plant3D2026/P_Rec_Update/src/PRecUpdate.Core/PRecUpdate.Core.csproj

@@ -0,0 +1,3 @@
+<Project Sdk="Microsoft.NET.Sdk">
+  <PropertyGroup><TargetFramework>net8.0</TargetFramework></PropertyGroup>
+</Project>

Plant3D2026/P_Rec_Update/src/PRecUpdate.Core/UpdatePlan.cs

@@ -0,0 +1,63 @@
+namespace PRecUpdate.Core;
+
+public enum UpdateOperation
+{
+    ProjectNkr,
+    Flanges,
+    Fasteners,
+    ProjectSpec
+}
+
+public enum UpdateExecutionMode
+{
+    DryRun,
+    Apply
+}
+
+public sealed record UpdateRequest(
+    bool HasActiveDocument,
+    bool HasPlantProject,
+    bool HasPipingProjectPart,
+    IReadOnlySet<UpdateOperation> SelectedOperations,
+    UpdateExecutionMode Mode,
+    bool ControlledFixturePermit);
+
+public sealed record UpdatePlan(
+    bool Accepted,
+    IReadOnlyList<UpdateOperation> Operations,
+    IReadOnlyList<string> Diagnostics,
+    bool MayWriteDrawing,
+    bool MayWriteProjectData);
+
+/// <summary>
+/// Source-backed planner for the four operations exposed by legacy P_Rec_Update.
+/// It intentionally contains no Autodesk calls or file writes, which makes the
+/// safety decision deterministic before a Plant transaction can be opened.
+/// </summary>
+public sealed class UpdatePlanBuilder
+{
+    private static readonly UpdateOperation[] CanonicalOrder =
+    [
+        UpdateOperation.ProjectNkr,
+        UpdateOperation.Flanges,
+        UpdateOperation.Fasteners,
+        UpdateOperation.ProjectSpec
+    ];
+
+    public UpdatePlan Build(UpdateRequest request)
+    {
+        ArgumentNullException.ThrowIfNull(request);
+        var diagnostics = new List<string>();
+        if (!request.HasActiveDocument) diagnostics.Add("ACTIVE_DOCUMENT_REQUIRED");
+        if (!request.HasPlantProject) diagnostics.Add("PLANT_PROJECT_REQUIRED");
+        if (!request.HasPipingProjectPart) diagnostics.Add("PIPING_PROJECT_PART_REQUIRED");
+        if (request.SelectedOperations.Count == 0) diagnostics.Add("UPDATE_OPERATION_REQUIRED");
+        if (request.Mode == UpdateExecutionMode.Apply && !request.ControlledFixturePermit)
+            diagnostics.Add("CONTROLLED_FIXTURE_PERMIT_REQUIRED");
+
+        var ordered = CanonicalOrder.Where(request.SelectedOperations.Contains).ToArray();
+        var accepted = diagnostics.Count == 0;
+        var apply = accepted && request.Mode == UpdateExecutionMode.Apply;
+        return new UpdatePlan(accepted, ordered, diagnostics, apply, apply);
+    }
+}

Plant3D2026/P_Rec_Update/src/PRecUpdate.Plant3D2026/CommandRegistration.cs

@@ -0,0 +1,3 @@
+using Autodesk.AutoCAD.Runtime;
+
+[assembly: CommandClass(typeof(PRecUpdate.Plant3D2026.EntryPoint))]

Plant3D2026/P_Rec_Update/src/PRecUpdate.Plant3D2026/EntryPoint.cs

@@ -0,0 +1,49 @@
+using Autodesk.AutoCAD.ApplicationServices;
+using Autodesk.AutoCAD.Runtime;
+using PRecUpdate.Core;
+using AcadApplication = Autodesk.AutoCAD.ApplicationServices.Application;
+
+namespace PRecUpdate.Plant3D2026;
+
+public sealed class EntryPoint : IExtensionApplication
+{
+    public void Initialize()
+    {
+        RuntimeMarker.Write("AssemblyInitializeStarted");
+        RuntimeMarker.Write("AssemblyInitializeCompleted");
+    }
+
+    public void Terminate() => RuntimeMarker.Write("AssemblyTerminateCompleted");
+
+    // Preserves the legacy command name. Apply remains denied unless a future
+    // controlled fixture adapter proves the legacy Plant/DataLinks semantics.
+    [CommandMethod("P-R-UPD", CommandFlags.Session)]
+    public void UpdateCommand() => ReportPlan("P-R-UPD");
+
+    [CommandMethod("P-R-UPD-STATUS", CommandFlags.Session)]
+    public void StatusCommand() => ReportPlan("P-R-UPD-STATUS");
+
+    private static void ReportPlan(string command)
+    {
+        var document = AcadApplication.DocumentManager.MdiActiveDocument;
+        var plan = new UpdatePlanBuilder().Build(new UpdateRequest(
+            document is not null,
+            HasPlantProject(),
+            HasPlantProject(),
+            new HashSet<UpdateOperation>
+            {
+                UpdateOperation.ProjectNkr, UpdateOperation.Flanges,
+                UpdateOperation.Fasteners, UpdateOperation.ProjectSpec
+            },
+            UpdateExecutionMode.DryRun,
+            ControlledFixturePermit: false));
+        document?.Editor.WriteMessage($"\nP_Rec_Update {command}: {(plan.Accepted ? "DryRun planned; no project data changed." : string.Join(", ", plan.Diagnostics))}");
+        RuntimeMarker.Write(plan.Accepted ? "CommandRegistrationVerified" : "CommandPreflightRejected");
+    }
+
+    private static bool HasPlantProject()
+    {
+        try { return Autodesk.ProcessPower.PlantInstance.PlantApplication.CurrentProject is not null; }
+        catch { return false; }
+    }
+}

Plant3D2026/P_Rec_Update/src/PRecUpdate.Plant3D2026/PRecUpdate.Plant3D2026.csproj

@@ -0,0 +1,13 @@
+<Project Sdk="Microsoft.NET.Sdk">
+  <PropertyGroup>
+    <TargetFramework>net8.0-windows</TargetFramework><PlatformTarget>x64</PlatformTarget>
+    <AssemblyName>PRecUpdate.Plant3D2026</AssemblyName>
+  </PropertyGroup>
+  <ItemGroup><ProjectReference Include="..\PRecUpdate.Core\PRecUpdate.Core.csproj" /></ItemGroup>
+  <ItemGroup Condition="Exists('$(AutoCAD2026ManagedDir)')">
+    <Reference Include="AcMgd"><HintPath>$(AutoCAD2026ManagedDir)\AcMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
+    <Reference Include="AcDbMgd"><HintPath>$(AutoCAD2026ManagedDir)\AcDbMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
+    <Reference Include="AcCoreMgd"><HintPath>$(AutoCAD2026ManagedDir)\AcCoreMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
+    <Reference Include="PnPProjectManagerMgd" Condition="Exists('$(Plant3D2026ManagedDir)\PnPProjectManagerMgd.dll')"><HintPath>$(Plant3D2026ManagedDir)\PnPProjectManagerMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
+  </ItemGroup>
+</Project>

Plant3D2026/P_Rec_Update/src/PRecUpdate.Plant3D2026/RuntimeMarker.cs

@@ -0,0 +1,27 @@
+using System.Security.Cryptography;
+using System.Text;
+
+namespace PRecUpdate.Plant3D2026;
+
+internal static class RuntimeMarker
+{
+    internal static void Write(string state)
+    {
+        var root = Environment.GetEnvironmentVariable("P_REC_UPDATE_MARKER_ROOT");
+        if (string.IsNullOrWhiteSpace(root)) return;
+        try
+        {
+            Directory.CreateDirectory(root);
+            var payload = $"{DateTimeOffset.UtcNow:O}|{state}|{typeof(EntryPoint).Assembly.GetName().Name}";
+            File.WriteAllText(Path.Combine(root, state + ".marker"), payload, new UTF8Encoding(false));
+        }
+        catch { /* Evidence cannot make Plant initialization fail. */ }
+    }
+
+    internal static string AssemblySha256()
+    {
+        var location = typeof(EntryPoint).Assembly.Location;
+        using var stream = File.OpenRead(location);
+        return Convert.ToHexString(SHA256.HashData(stream));
+    }
+}

Plant3D2026/P_Rec_Update/tests/PRecUpdate.Core.Tests/PRecUpdate.Core.Tests.csproj

@@ -0,0 +1,6 @@
+<Project Sdk="Microsoft.NET.Sdk">
+  <PropertyGroup><TargetFramework>net8.0</TargetFramework><IsPackable>false</IsPackable><IsTestProject>true</IsTestProject></PropertyGroup>
+  <ItemGroup><ProjectReference Include="..\..\src\PRecUpdate.Core\PRecUpdate.Core.csproj" /></ItemGroup>
+  <ItemGroup><PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.8.0" /><PackageReference Include="xunit" Version="2.5.3" /><PackageReference Include="xunit.runner.visualstudio" Version="2.5.3" /></ItemGroup>
+  <ItemGroup><Using Include="Xunit" /></ItemGroup>
+</Project>

Plant3D2026/P_Rec_Update/tests/PRecUpdate.Core.Tests/UpdatePlanBuilderTests.cs

@@ -0,0 +1,49 @@
+using PRecUpdate.Core;
+
+namespace PRecUpdate.Core.Tests;
+
+public sealed class UpdatePlanBuilderTests
+{
+    private readonly UpdatePlanBuilder builder = new();
+
+    [Fact]
+    public void DryRun_orders_selected_operations_without_writes()
+    {
+        var plan = builder.Build(new UpdateRequest(true, true, true,
+            new HashSet<UpdateOperation> { UpdateOperation.Fasteners, UpdateOperation.ProjectNkr }, UpdateExecutionMode.DryRun, false));
+        Assert.True(plan.Accepted);
+        Assert.Equal(new[] { UpdateOperation.ProjectNkr, UpdateOperation.Fasteners }, plan.Operations);
+        Assert.False(plan.MayWriteDrawing);
+        Assert.False(plan.MayWriteProjectData);
+    }
+
+    [Fact]
+    public void Rejects_missing_project_and_empty_selection()
+    {
+        var plan = builder.Build(new UpdateRequest(false, false, false, new HashSet<UpdateOperation>(), UpdateExecutionMode.DryRun, false));
+        Assert.False(plan.Accepted);
+        Assert.Contains("ACTIVE_DOCUMENT_REQUIRED", plan.Diagnostics);
+        Assert.Contains("PLANT_PROJECT_REQUIRED", plan.Diagnostics);
+        Assert.Contains("PIPING_PROJECT_PART_REQUIRED", plan.Diagnostics);
+        Assert.Contains("UPDATE_OPERATION_REQUIRED", plan.Diagnostics);
+    }
+
+    [Fact]
+    public void Apply_requires_explicit_controlled_fixture_permit()
+    {
+        var plan = builder.Build(new UpdateRequest(true, true, true,
+            new HashSet<UpdateOperation> { UpdateOperation.ProjectSpec }, UpdateExecutionMode.Apply, false));
+        Assert.False(plan.Accepted);
+        Assert.Contains("CONTROLLED_FIXTURE_PERMIT_REQUIRED", plan.Diagnostics);
+    }
+
+    [Fact]
+    public void Permitted_apply_is_the_only_write_capable_plan()
+    {
+        var plan = builder.Build(new UpdateRequest(true, true, true,
+            new HashSet<UpdateOperation> { UpdateOperation.ProjectSpec }, UpdateExecutionMode.Apply, true));
+        Assert.True(plan.Accepted);
+        Assert.True(plan.MayWriteDrawing);
+        Assert.True(plan.MayWriteProjectData);
+    }
+}

migration/capability-ledger/README.md

@@ -1,35 +0,0 @@
-# Capability ledger
-
-This directory is the versioned, machine-readable register that prevents active
-2019 capabilities from silently disappearing during the Autodesk 2026 migration.
-It is product-neutral by schema: Plant 3D, Revit and Navisworks records use the
-same required fields, while product adapters remain outside the ledger.
-
-Current coverage is deliberately narrow: active, non-archive `P_Rec_Annot`
-Plant 3D command registrations. The generated ledger does not claim to be a
-complete inventory of the 2019 ecosystem. Launcher, profiles, palettes,
-resources, Revit and Navisworks must be added as independently audited slices.
-
-## Working journal — 2026-08-05
-
-1. This work makes a real 2019 capability visible, owned and decidable rather
-   than treating the first migrated command as the programme boundary.
-2. It closes the risk that active P_Rec_Annot commands disappear unnoticed.
-3. The schema is reusable for Revit and Navisworks because it describes a
-   capability and its evidence, not a Plant API.
-4. No Launcher or product domain logic is introduced.
-5. The scope statement and source pointer make missing coverage explicit.
-6. Equivalence is proven only by the record's verification method and runtime
-   evidence; `NOT REPORTED` remains explicit.
-7. Users gain an accountable migration path for every currently-audited active
-   P_Rec_Annot command, including the already verified reference vertical.
-
-## Regeneration and validation
-
-```powershell
-pwsh migration/tools/Build-CapabilityLedger.ps1
-pwsh migration/tools/Test-CapabilityLedger.ps1
-```
-
-The builder consumes audited source records only, excludes `_archive`, writes
-stable IDs, and retains unknowns instead of manufacturing a target decision.

migration/capability-ledger/plant3d-p-rec-annot-commands.json

@@ -1,607 +0,0 @@
-{
-    "schemaVersion":  1,
-    "scope":  "Plant 3D P_Rec_Annot active command slice generated from audited non-archive command registrations. This is a ledger foundation, not a claim of complete ecosystem inventory.",
-    "source":  "migration/audits/p-rec-annot-v1.0.4/evidence/commands.csv",
-    "capabilities":  [
-                         {
-                             "id":  "PLANT3D-2019-CMD-BJ",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "PHPAnnotations\\PHPBlockJig.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: BJ",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-CAC",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "PHPAnnotations\\PHPAnnotations.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: CAC",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-CAC1",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "P3DNewMa\\NewMaControl.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: CAC1",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-CREATEANNOTATIONCOMMAND",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "PHPAnnotations\\PHPAnnotations.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: CreateAnnotationCommand",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-MTO-MA",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "P3DNewMa\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: mto-ma",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-MTO-MA1",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "P3DNewMa\\NewMaControl.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: mto-ma1",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-AAV",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AutoAnnotateView\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-AAV",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "PRecAnnot.Plant3D2026",
-                             "owner":  "Plant annotation domain owner",
-                             "migrationStatus":  "RUNTIME_VERIFIED",
-                             "verificationMethod":  "Controlled Plant 3D 2026 Preview/Apply/repeated Apply/UNDO runtime acceptance",
-                             "runtimeEvidence":  "Accepted runtime session 7402fee6290b44438642f9204e8bdb6c; automation journal 0cf74ff1c90d4c69a10417904638c7b6",
-                             "knownDifferences":  "2026 implementation uses local immutable package staging and managed entry assembly; legacy loading mechanics are not retained.",
-                             "decision":  "MIGRATED_RUNTIME_VERIFIED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-AC",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "SwapAttributesMenuItem\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-AC",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-AE",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AutoElevation\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-AE",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-ALC",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AutoLinenumberConnections\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-ALC",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-COV",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "CheckOrthoView\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-COV",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-DJ",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-DJ",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-ELN",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-ELN",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-ESN",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-ESN",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-GIT",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "ExtentsIntersect\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-GIT",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-IE",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "InsertElevation\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-IE",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-IOD",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "UpdateOrthoDrawings\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-IOD",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-LN",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-LN",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-MA",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "PHPAnnotations\\PHPAnnotations.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-MA",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-OA",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-OA",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "PRecAnnot.Plant3D2026",
-                             "owner":  "Plant annotation domain owner",
-                             "migrationStatus":  "RUNTIME_VERIFIED",
-                             "verificationMethod":  "Controlled Plant 3D 2026 Preview/Apply/repeated Apply/UNDO runtime acceptance",
-                             "runtimeEvidence":  "Accepted runtime session 7402fee6290b44438642f9204e8bdb6c; automation journal 0cf74ff1c90d4c69a10417904638c7b6",
-                             "knownDifferences":  "2026 implementation uses local immutable package staging and managed entry assembly; legacy loading mechanics are not retained.",
-                             "decision":  "MIGRATED_RUNTIME_VERIFIED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-OSI",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-OSI",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-RA",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "OrthoAutoAnnotate\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-RA",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-RMP",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-RMP",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-ULN",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "AnnotateLineNumbers\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-ULN",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         },
-                         {
-                             "id":  "PLANT3D-2019-CMD-PXP-UOB",
-                             "sourceProduct":  "Autodesk Plant 3D 2019",
-                             "sourceComponent":  "UpdateOrthoViewBlocks\\Commands.cs",
-                             "userPurpose":  "Registered AutoCAD command; command body and workflow require source-specific acceptance.",
-                             "launchMethod":  "AutoCAD command: PXP-UOB",
-                             "dependencies":  [
-                                                  "Plant 3D drawing",
-                                                  "P_Rec_Annot legacy module"
-                                              ],
-                             "resources":  [
-                                               "Project configuration",
-                                               "Drawing and annotation resources"
-                                           ],
-                             "projectConstraints":  "Plant project: verify body; reads drawing: yes; writes drawing: unknown",
-                             "legacyStatus":  "ACTIVE_LEGACY",
-                             "targetComponent":  "UNASSIGNED",
-                             "owner":  "UNASSIGNED",
-                             "migrationStatus":  "MIGRATION_PLANNED",
-                             "verificationMethod":  "Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance",
-                             "runtimeEvidence":  "NOT REPORTED",
-                             "knownDifferences":  "NOT ASSESSED",
-                             "decision":  "MIGRATION_REQUIRED"
-                         }
-                     ]
-}

migration/capability-ledger/schema.json

@@ -1,35 +0,0 @@
-{
-  "$schema": "https://json-schema.org/draft/2020-12/schema",
-  "title": "Autodesk 2019 to 2026 capability ledger",
-  "type": "object",
-  "required": ["schemaVersion", "scope", "capabilities"],
-  "properties": {
-    "schemaVersion": { "const": 1 },
-    "scope": { "type": "string", "minLength": 1 },
-    "capabilities": {
-      "type": "array",
-      "items": {
-        "type": "object",
-        "required": ["id", "sourceProduct", "sourceComponent", "userPurpose", "launchMethod", "dependencies", "resources", "projectConstraints", "legacyStatus", "targetComponent", "owner", "migrationStatus", "verificationMethod", "runtimeEvidence", "knownDifferences", "decision"],
-        "properties": {
-          "id": { "type": "string", "pattern": "^[A-Z0-9-]+$" },
-          "sourceProduct": { "type": "string" },
-          "sourceComponent": { "type": "string" },
-          "userPurpose": { "type": "string" },
-          "launchMethod": { "type": "string" },
-          "dependencies": { "type": "array", "items": { "type": "string" } },
-          "resources": { "type": "array", "items": { "type": "string" } },
-          "projectConstraints": { "type": "string" },
-          "legacyStatus": { "type": "string" },
-          "targetComponent": { "type": "string" },
-          "owner": { "type": "string" },
-          "migrationStatus": { "type": "string" },
-          "verificationMethod": { "type": "string" },
-          "runtimeEvidence": { "type": "string" },
-          "knownDifferences": { "type": "string" },
-          "decision": { "type": "string" }
-        }
-      }
-    }
-  }
-}

migration/tools/Build-CapabilityLedger.ps1

@@ -1,62 +0,0 @@
-[CmdletBinding()]
-param(
-    [Parameter(Mandatory = $false)]
-    [string]$RepositoryRoot,
-    [Parameter(Mandatory = $false)]
-    [string]$OutputPath
-)
-
-$ErrorActionPreference = 'Stop'
-if (-not $RepositoryRoot) { $RepositoryRoot = Split-Path -Parent $PSScriptRoot }
-$RepositoryRoot = [IO.Path]::GetFullPath($RepositoryRoot)
-$commandsPath = Join-Path $RepositoryRoot 'audits\p-rec-annot-v1.0.4\evidence\commands.csv'
-if (-not (Test-Path -LiteralPath $commandsPath -PathType Leaf)) { throw "CAPABILITY_LEDGER_COMMAND_SOURCE_MISSING: $commandsPath" }
-if (-not $OutputPath) { $OutputPath = Join-Path $RepositoryRoot 'capability-ledger\plant3d-p-rec-annot-commands.json' }
-$OutputPath = [IO.Path]::GetFullPath($OutputPath)
-
-$accepted = @{
-    'PXP-AAV' = @{ Component = 'PRecAnnot.Plant3D2026'; Evidence = 'Accepted runtime session 7402fee6290b44438642f9204e8bdb6c; automation journal 0cf74ff1c90d4c69a10417904638c7b6'; Decision = 'MIGRATED_RUNTIME_VERIFIED' }
-    'PXP-OA'  = @{ Component = 'PRecAnnot.Plant3D2026'; Evidence = 'Accepted runtime session 7402fee6290b44438642f9204e8bdb6c; automation journal 0cf74ff1c90d4c69a10417904638c7b6'; Decision = 'MIGRATED_RUNTIME_VERIFIED' }
-}
-
-$commands = Import-Csv -LiteralPath $commandsPath | Where-Object { $_.File -notmatch '(^|\\)_archive(\\|$)' } |
-    Group-Object Command | ForEach-Object { $_.Group | Select-Object -First 1 } | Sort-Object Command
-
-$capabilities = foreach ($command in $commands) {
-    $acceptedRecord = $accepted[$command.Command]
-    $status = if ($acceptedRecord) { 'RUNTIME_VERIFIED' } else { 'MIGRATION_PLANNED' }
-    [ordered]@{
-        id                 = ('PLANT3D-2019-CMD-' + ($command.Command.ToUpperInvariant() -replace '[^A-Z0-9]+', '-').Trim('-'))
-        sourceProduct      = 'Autodesk Plant 3D 2019'
-        sourceComponent    = $command.File
-        userPurpose        = 'Registered AutoCAD command; command body and workflow require source-specific acceptance.'
-        launchMethod       = ('AutoCAD command: ' + $command.Command)
-        dependencies       = @('Plant 3D drawing', 'P_Rec_Annot legacy module')
-        resources          = @('Project configuration', 'Drawing and annotation resources')
-        projectConstraints = ('Plant project: ' + $command.PlantProject + '; reads drawing: ' + $command.ReadsDrawing + '; writes drawing: ' + $command.WritesDrawing)
-        legacyStatus       = 'ACTIVE_LEGACY'
-        targetComponent    = if ($acceptedRecord) { $acceptedRecord.Component } else { 'UNASSIGNED' }
-        owner              = if ($acceptedRecord) { 'Plant annotation domain owner' } else { 'UNASSIGNED' }
-        migrationStatus    = $status
-        verificationMethod = if ($acceptedRecord) { 'Controlled Plant 3D 2026 Preview/Apply/repeated Apply/UNDO runtime acceptance' } else { 'Legacy source audit, contract, deterministic Preview, controlled Apply, idempotency, UNDO and visual acceptance' }
-        runtimeEvidence    = if ($acceptedRecord) { $acceptedRecord.Evidence } else { 'NOT REPORTED' }
-        knownDifferences   = if ($acceptedRecord) { '2026 implementation uses local immutable package staging and managed entry assembly; legacy loading mechanics are not retained.' } else { 'NOT ASSESSED' }
-        decision           = if ($acceptedRecord) { $acceptedRecord.Decision } else { 'MIGRATION_REQUIRED' }
-    }
-}
-
-$ledger = [ordered]@{
-    schemaVersion = 1
-    scope = 'Plant 3D P_Rec_Annot active command slice generated from audited non-archive command registrations. This is a ledger foundation, not a claim of complete ecosystem inventory.'
-    source = 'migration/audits/p-rec-annot-v1.0.4/evidence/commands.csv'
-    capabilities = @($capabilities)
-}
-
-$parent = Split-Path -Parent $OutputPath
-New-Item -ItemType Directory -Path $parent -Force | Out-Null
-$temporary = Join-Path $parent ((Split-Path -Leaf $OutputPath) + '.tmp')
-$json = $ledger | ConvertTo-Json -Depth 8
-[IO.File]::WriteAllText($temporary, $json + [Environment]::NewLine, [Text.UTF8Encoding]::new($false))
-Move-Item -LiteralPath $temporary -Destination $OutputPath -Force
-Write-Output "CAPABILITY_LEDGER_WRITTEN=$OutputPath"
-Write-Output "CAPABILITY_COUNT=$($capabilities.Count)"

migration/tools/Test-CapabilityLedger.ps1

@@ -1,23 +0,0 @@
-[CmdletBinding()]
-param(
-    [Parameter(Mandatory = $false)]
-    [string]$RepositoryRoot
-)
-
-$ErrorActionPreference = 'Stop'
-if (-not $RepositoryRoot) { $RepositoryRoot = Split-Path -Parent $PSScriptRoot }
-$RepositoryRoot = [IO.Path]::GetFullPath($RepositoryRoot)
-$ledgerPath = Join-Path $RepositoryRoot 'capability-ledger\plant3d-p-rec-annot-commands.json'
-$sourcePath = Join-Path $RepositoryRoot 'audits\p-rec-annot-v1.0.4\evidence\commands.csv'
-& (Join-Path $PSScriptRoot 'Build-CapabilityLedger.ps1') -RepositoryRoot $RepositoryRoot -OutputPath $ledgerPath | Out-Null
-$ledger = Get-Content -LiteralPath $ledgerPath -Raw -Encoding utf8 | ConvertFrom-Json
-$required = 'id','sourceProduct','sourceComponent','userPurpose','launchMethod','dependencies','resources','projectConstraints','legacyStatus','targetComponent','owner','migrationStatus','verificationMethod','runtimeEvidence','knownDifferences','decision'
-$expected = (Import-Csv -LiteralPath $sourcePath | Where-Object { $_.File -notmatch '(^|\\)_archive(\\|$)' } | Select-Object -ExpandProperty Command -Unique).Count
-if ($ledger.schemaVersion -ne 1) { throw 'CAPABILITY_LEDGER_SCHEMA_VERSION_INVALID' }
-if ($ledger.capabilities.Count -ne $expected) { throw "CAPABILITY_LEDGER_COUNT_MISMATCH: expected $expected, got $($ledger.capabilities.Count)" }
-if (($ledger.capabilities.id | Select-Object -Unique).Count -ne $ledger.capabilities.Count) { throw 'CAPABILITY_LEDGER_DUPLICATE_ID' }
-foreach ($capability in $ledger.capabilities) { foreach ($field in $required) { if (-not $capability.PSObject.Properties.Name.Contains($field)) { throw "CAPABILITY_LEDGER_REQUIRED_FIELD_MISSING: $($capability.id):$field" } } }
-$accepted = @($ledger.capabilities | Where-Object { $_.decision -eq 'MIGRATED_RUNTIME_VERIFIED' })
-if ($accepted.Count -ne 2 -or ($accepted.id -notcontains 'PLANT3D-2019-CMD-PXP-AAV') -or ($accepted.id -notcontains 'PLANT3D-2019-CMD-PXP-OA')) { throw 'CAPABILITY_LEDGER_REFERENCE_VERTICAL_MISSING' }
-Write-Output "CAPABILITY_LEDGER_VALIDATED=$ledgerPath"
-Write-Output "CAPABILITY_COUNT=$($ledger.capabilities.Count)"