docs: record source-model DataLinks runtime evidence

Plant3D2026/P_Rec_Annot/AGENTS.md

@@ -63,6 +63,16 @@ DataLinks активного Ortho drawing не являются источни
 rows читаются из source model drawing и Piping project part, разрешённых через
 Ortho sheet/view definitions.
 
+Перед предположениями об Autodesk runtime API необходимо исследовать текущий
+код, доступный legacy usage, assembly metadata и реальные runtime types.
+Reflection/runtime inspection применяется только для подтверждения данных,
+которых нельзя установить статически. Production resolver не угадывает
+Autodesk properties по строковым именам.
+
+Подтверждённый контракт Plant 3D 2026: `IDwgViewDef.DwgQuery` →
+`IDwgQuery.ModelFiles` → `ModelFile[].ModelFileName`. При несовпадении типа
+возвращать `ORTHO_MODEL_FILES_API_UNSUPPORTED`, без fallback-эвристики.
+
 Проверка DCF выполняется на парных `control` и `DryRun` fixtures, созданных из
 одного закрытого состояния проекта. Сравнивать нужно `control delta` с
 `DryRun delta`: одинаковые изменения классифицируются как baseline behavior

Plant3D2026/P_Rec_Annot/docs/evidence/ortho-runtime-summary.json

@@ -6,16 +6,23 @@
   "orthoDetection": "Confirmed",
   "viewportCount": 1,
   "dataLinksAvailable": true,
-  "dataLinksSheetToSourceMapping": "blocked",
+  "dataLinksSheetToSourceMapping": "resolved-through-piping-project-drawing-id",
-  "objectsRead": 0,
+  "sourceDrawingsResolved": 1,
-  "phpRecAnnotRuns": 2,
+  "sourceDataLinksAvailable": true,
-  "pxpAavRuns": 2,
+  "objectsRead": 7,
-  "pxpOaRuns": 1,
+  "pipeObjectsRead": 7,
-  "dbmodBefore": 0,
+  "phpRecAnnotRuns": 1,
-  "dbmodAfter": 0,
+  "pxpAavRuns": null,
+  "pxpOaRuns": null,
+  "planId": null,
+  "repeatedPlanIdEqual": null,
+  "dbmodBefore": null,
+  "dbmodAfter": null,
   "dwgModified": null,
-  "dcfModified": true,
+  "dcfModified": null,
-  "changedProjectFiles": ["Piping.dcf"],
+  "changedProjectFiles": null,
   "unhandledExceptions": 0,
-  "applyModeUsed": false
+  "applyModeUsed": false,
+  "launcherRollback": "RolledBack",
+  "exactViewportMembership": "not-verified"
 }

Plant3D2026/P_Rec_Annot/docs/ortho-runtime-results.md

@@ -10,13 +10,19 @@ viewport. In `DryRun`, `PHP_REC_ANNOT` ran twice, `PXP-AAV` ran twice, and
 `PlantProject.Name` was available for this fixture and rendered as
 `PRecAnnotTestProject`.
 
-The Ortho sheet did not expose direct Piping rows through
+The active Ortho sheet does not expose direct Piping rows and must not be used
-`DataLinksManager.SelectAcPpRowIds`; that API threw `DLException: NotFound`.
+as a DataLinks source. Metadata inspection and a sanitized runtime probe
-The adapter now converts this to an empty read-only result. Consequently the
+confirmed `IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName` as the source-model
-run read zero source Plant objects and produced an empty plan. Mapping the
+reference. The adapter resolves that reference through
-Ortho sheet to source-model objects remains the blocker for non-empty
+`PipingProject.GetPnPDrawingFiles()` and reads
-AnnotationPlan validation.
+`DataLinksManager.SelectAcPpRowIds(PnPProjectDrawing.Id)`.
+
+On the latest real DryRun, one source drawing was resolved and seven source
+Plant objects were read. `PHP_REC_ANNOT` reported seven skipped operations,
+zero writes, zero conflicts, and zero errors. This verifies source-model
+DataLinks access; it does not yet verify exact source-object-to-viewport
+membership or repeated-plan determinism.
 
 The test fixture SHA baseline changed for `Piping.dcf` before the first DryRun
-command. This run therefore does not prove DCF invariance, although no plugin
+command. This run therefore does not prove DCF invariance. A paired control
-write operation was performed and DBMOD remained unchanged.
+fixture versus DryRun fixture comparison remains required.

Plant3D2026/P_Rec_Annot/docs/ortho-source-mapping.md

@@ -0,0 +1,39 @@
+# Ortho source-model mapping
+
+## Confirmed Plant 3D 2026 read path
+
+```text
+Active Ortho document
+→ OrthoProject.DwgSheetDefinitions
+→ IDwgSheetDef.DwgViewDefs
+→ IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName
+→ PipingProject.GetPnPDrawingFiles()
+→ exact normalized-path match to PnPProjectDrawing
+→ PnPProjectDrawing.Id
+→ DataLinksManager.SelectAcPpRowIds(int dwgid)
+→ GetObjectClassname / GetAllProperties
+→ independent PlantObjectSnapshot
+→ AnnotationPlanBuilder
+```
+
+`PlantOrthoViewportReader.ReadViewports` reads the typed DwgQuery contract and
+creates an Ortho viewport snapshot. `PlantObjectReader.ReadObjects` resolves
+the resulting model-file reference through the Piping project drawing list and
+reads DataLinks by project drawing ID. The active Ortho database is not a
+Piping-row source.
+
+All calls are read-only. The adapter opens no write transaction and does not
+save a drawing, DCF, or project metadata.
+
+## Diagnostics
+
+The source reader returns stable telemetry diagnostics rather than suppressing
+the result of a failed query: `ORTHO_SOURCE_DRAWING_NOT_RESOLVED`,
+`ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT`, `ORTHO_SOURCE_DRAWING_AMBIGUOUS`,
+`PIPING_PROJECT_PART_NOT_FOUND`, `SOURCE_DATALINKS_UNAVAILABLE`,
+`SOURCE_DATALINKS_NO_ROWS`, `SOURCE_DATABASE_READ_FAILED`,
+`SOURCE_PIPE_ROWS_NOT_FOUND`, or `SOURCE_DATALINKS_READ`.
+
+Exact membership of a source object in a particular Ortho viewport is not yet
+implemented. A source-level DryRun plan must not be presented as proof of
+viewport membership.

Plant3D2026/P_Rec_Annot/docs/research/dwgquery-model-files-api.md

@@ -0,0 +1,101 @@
+# Plant 3D 2026 DwgQuery / ModelFiles API contract
+
+## Scope and method
+
+This report is based on metadata-only inspection of the installed Plant 3D 2026
+assemblies. The assemblies were read from `<PLANT3D_2026_INSTALL>` and were not
+copied into the repository. Metadata-only inspection was necessary because the
+normal PowerShell host cannot load the product's .NET 8 dependencies safely.
+
+Legacy source at the documented local path was not present on this machine, so
+there is no legacy API claim in this report.
+
+## Confirmed assemblies
+
+| Assembly | Version | Relevant type |
+| --- | --- | --- |
+| `PnPDwg2dDef` | `0.0.0.0` | `Autodesk.ProcessPower.Drawings2d.DwgQuery`, `IDwgQuery`, `DwgViewDef`, `IDwgViewDef`, `DwgSheetDef`, `IDwgSheetDef` |
+| `PnPDwg2dUtil` | `0.0.0.0` | `Autodesk.ProcessPower.Drawings2d.ModelFile` |
+| `PnP3dOrthoProjectPart` | `17.0.60.1` | Ortho project-part integration assembly; the metadata scan found no public DwgQuery declaration there |
+
+`PnPDwg2dDef` and `PnPDwg2dUtil` use `0.0.0.0` assembly versions in the
+installed metadata. The supported runtime contract is therefore identified by
+the exact public type names below, not by an invented product-version number.
+
+## Confirmed contract
+
+```text
+Autodesk.ProcessPower.Drawings2d.IDwgViewDef.DwgQuery
+  : Autodesk.ProcessPower.Drawings2d.IDwgQuery
+
+Autodesk.ProcessPower.Drawings2d.IDwgQuery.ModelFiles
+  : Autodesk.ProcessPower.Drawings2d.ModelFile[]
+
+Autodesk.ProcessPower.Drawings2d.ModelFile.ModelFileName
+  : System.String
+
+Autodesk.ProcessPower.Drawings2d.ModelFile.ModelFileGuid
+  : System.String
+```
+
+`DwgViewDef` implements `IDwgViewDef`; `DwgQuery` implements `IDwgQuery` and
+`IDisposable`; `ModelFile` implements `IComparable<ModelFile>`.
+
+`ModelFiles` is an array, not an untyped enumerable. `ModelFileName` is the
+only confirmed string field representing the model-file reference. `ModelFileGuid`
+is a separate identity field. `IsReferencedDwg` and `Xform` describe reference
+state and transform, not a substitute path.
+
+## Public members relevant to source resolution
+
+`IDwgViewDef` exposes `DwgQuery`, `ViewName`, layout/orientation properties,
+and `SetClippingPlanes`, `SetLayout`, `SetOrientation`, `Erase`, and `New`.
+
+`IDwgQuery` exposes `ModelFiles`, `Execute`, and `Erase`.
+
+`ModelFile` exposes `ModelFileName`, `ModelFileGuid`, `IsReferencedDwg`, and
+`Xform`; its constructors accept a file-name string and optional transform,
+reference flag, and GUID.
+
+`IDwgSheetDef.DwgViewDefs` exposes the view-definition collection. Sheet
+`DwgName`/`DwgPath` identify the Ortho sheet and must not be used as the source
+of Piping DataLinks.
+
+## Current and legacy usage
+
+The original adapter used reflection and tried several possible names
+(`ModelFileName`, `Value`, and arbitrary string values). That was not a valid
+Plant 3D 2026 contract.
+
+The production read path now uses the confirmed typed chain only:
+
+```text
+IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName
+```
+
+The legacy source path was unavailable locally, so no legacy source-model or
+DataLinks workaround has been imported.
+
+## Runtime evidence
+
+Static metadata cannot prove whether `ModelFileName` is project-relative or
+absolute in a concrete Ortho fixture, or whether a particular view has zero,
+one, or multiple model files. In DryRun only, setting
+`P_REC_ANNOT_DIAGNOSTICS=OrthoStructure` enables a sanitized structure probe.
+It records type names, collection counts, null state, string length, and a
+one-way value hash; it does not emit paths or engineering data.
+
+On the local DryRun fixture, the runtime probe recorded one view with one
+`ModelFile`. The concrete types were `DwgViewDef`, `DwgQueryByBox`, and
+`ModelFile[]`; `ModelFileName` was non-null and an absolute fixture-model
+reference. The path itself was not retained in repository evidence.
+
+The resolver resolves that reference to exactly one
+`PipingProject.GetPnPDrawingFiles()` entry by normalized full-path equality,
+then uses the confirmed `DataLinksManager.SelectAcPpRowIds(int dwgid)` overload
+with the resolved `PnPProjectDrawing.Id`. It does not open or query the active
+Ortho database for Piping rows.
+
+The production resolver has no fallback property-name search. If the exact
+contract is unavailable at runtime it reports
+`ORTHO_MODEL_FILES_API_UNSUPPORTED` rather than guessing.

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/OrthoRuntimeStructureInspector.cs

@@ -0,0 +1,81 @@
+using System.Collections;
+using System.Reflection;
+using System.Security.Cryptography;
+using System.Text;
+using Autodesk.ProcessPower.Drawings2d;
+
+namespace PRecAnnot.Plant3D2026;
+
+// This is a diagnostic-only probe. It is never part of source resolution and is
+// called only by the explicit DryRun/OrthoStructure environment flag combination.
+internal static class OrthoRuntimeStructureInspector
+{
+    public static void Inspect(IDwgViewDef view)
+    {
+        if (!RuntimeDiagnostics.IsOrthoStructureDiagnosticsEnabled) return;
+
+        try
+        {
+            var query = view.DwgQuery;
+            var modelFiles = query?.ModelFiles;
+            var details = new Dictionary<string, object?>
+            {
+                ["ViewRuntimeType"] = TypeName(view.GetType()),
+                ["DwgQueryRuntimeType"] = query is null ? null : TypeName(query.GetType()),
+                ["ModelFilesDeclaredType"] = typeof(ModelFile[]).FullName,
+                ["ModelFilesRuntimeType"] = modelFiles?.GetType().AssemblyQualifiedName,
+                ["ModelFilesCount"] = modelFiles?.Length ?? 0,
+                ["ModelFileElements"] = modelFiles?.Select(DescribeModelFile).ToArray() ?? Array.Empty<IReadOnlyDictionary<string, object?>>()
+            };
+            RuntimeDiagnostics.Write("OrthoRuntimeStructureInspected", resultStatus: "Captured", details: details);
+        }
+        catch (Exception exception)
+        {
+            RuntimeDiagnostics.Write("OrthoRuntimeStructureInspectionFailed", "WARNING", resultStatus: "Failed", exception: exception);
+        }
+    }
+
+    private static IReadOnlyDictionary<string, object?> DescribeModelFile(ModelFile? modelFile)
+    {
+        if (modelFile is null)
+        {
+            return new Dictionary<string, object?> { ["IsNull"] = true };
+        }
+
+        var properties = modelFile.GetType()
+            .GetProperties(BindingFlags.Instance | BindingFlags.Public)
+            .Where(property => property.CanRead && property.GetIndexParameters().Length == 0)
+            .OrderBy(property => property.Name, StringComparer.Ordinal)
+            .Select(property => DescribeProperty(modelFile, property))
+            .ToArray();
+        return new Dictionary<string, object?>
+        {
+            ["RuntimeType"] = TypeName(modelFile.GetType()),
+            ["Properties"] = properties
+        };
+    }
+
+    private static IReadOnlyDictionary<string, object?> DescribeProperty(ModelFile modelFile, PropertyInfo property)
+    {
+        object? value;
+        try { value = property.GetValue(modelFile); }
+        catch { value = null; }
+        return new Dictionary<string, object?>
+        {
+            ["PropertyName"] = property.Name,
+            ["PropertyType"] = property.PropertyType.FullName,
+            ["ValueKind"] = value?.GetType().FullName ?? "null",
+            ["IsNull"] = value is null,
+            ["StringLength"] = value is string text ? text.Length : null,
+            ["PathKind"] = property.Name == "ModelFileName" && value is string path
+                ? (Path.IsPathRooted(path) ? "Absolute" : "ProjectRelative")
+                : null,
+            ["CollectionCount"] = value is ICollection collection ? collection.Count : null,
+            ["StableHash"] = value is null ? null : Hash(value.ToString() ?? string.Empty)
+        };
+    }
+
+    private static string TypeName(Type type) => $"{type.FullName}, {type.Assembly.GetName().Name}, {type.Assembly.GetName().Version}";
+
+    private static string Hash(string value) => Convert.ToHexString(SHA256.HashData(Encoding.UTF8.GetBytes(value)))[..16];
+}

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/PRecAnnot.Plant3D2026.csproj

@@ -14,7 +14,9 @@
     <Reference Include="PnPDataObjects"><HintPath>$(AutoCAD2026ManagedDir)\PnPDataObjects.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnPProjectManagerMgd"><HintPath>$(Plant3D2026ManagedDir)\PnPProjectManagerMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnP3dObjectsMgd"><HintPath>$(Plant3D2026ManagedDir)\PnP3dObjectsMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
+    <Reference Include="PnP3dProjectPartsMgd"><HintPath>$(Plant3D2026ManagedDir)\PnP3dProjectPartsMgd.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnP3dOrthoProjectPart"><HintPath>$(Plant3D2026ManagedDir)\PnP3dOrthoProjectPart.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
     <Reference Include="PnPDwg2dDef"><HintPath>$(Plant3D2026ManagedDir)\PnPDwg2dDef.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
+    <Reference Include="PnPDwg2dUtil"><HintPath>$(Plant3D2026ManagedDir)\PnPDwg2dUtil.dll</HintPath><Private>false</Private><CopyLocal>false</CopyLocal></Reference>
   </ItemGroup>
 </Project>

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/PlantReadPath.cs

@@ -3,6 +3,7 @@ using System.Text;
 using Autodesk.AutoCAD.ApplicationServices;
 using Autodesk.AutoCAD.DatabaseServices;
 using Autodesk.ProcessPower.DataLinks;
+using Autodesk.ProcessPower.Drawings2d;
 using Autodesk.ProcessPower.P3dProjectParts;
 using Autodesk.ProcessPower.PlantInstance;
 using Autodesk.ProcessPower.ProjectManager;
@@ -151,50 +152,134 @@ internal sealed class PlantOrthoViewportReader : IOrthoViewportReader
         return "vp-" + Convert.ToHexString(hash)[..20];
     }
 
-    private static string? ReadSourceDrawingPath(object view)
+    private static string? ReadSourceDrawingPath(IDwgViewDef view)
     {
-        // The Plant 3D 2026 view definition owns a DwgQuery. Its ModelFiles are
+        // Confirmed Plant 3D 2026 contract (PnPDwg2dDef/PnPDwg2dUtil):
-        // the authoritative source-model references; sheet.DwgName is the Ortho
+        // IDwgViewDef.DwgQuery -> IDwgQuery.ModelFiles -> ModelFile.ModelFileName.
-        // sheet and must not be used for Piping DataLinks.
+        // The Ortho sheet is never used as a Piping DataLinks source.
         try
         {
-            var query = view.GetType().GetProperty("DwgQuery")?.GetValue(view);
+            if (!OrthoModelFilesContract.IsSupported(view, out var diagnostic))
-            var files = query?.GetType().GetProperty("ModelFiles")?.GetValue(query) as System.Collections.IEnumerable;
-            if (files is null) return null;
-            foreach (var file in files)
             {
-                var value = file as string
+                RuntimeDiagnostics.Write("OrthoModelFilesContractRejected", "WARNING", resultStatus: diagnostic.Code, details: diagnostic.Details);
-                    ?? file?.GetType().GetProperty("ModelFileName")?.GetValue(file)?.ToString()
+                return null;
-                    ?? file?.GetType().GetProperty("Value")?.GetValue(file)?.ToString();
-                if (!string.IsNullOrWhiteSpace(value)) return value;
             }
+
+            if (RuntimeDiagnostics.IsOrthoStructureDiagnosticsEnabled)
+            {
+                OrthoRuntimeStructureInspector.Inspect(view);
+            }
+
+            return view.DwgQuery?.ModelFiles
+                .Select(file => file.ModelFileName)
+                .FirstOrDefault(value => !string.IsNullOrWhiteSpace(value));
+        }
+        catch (Exception exception)
+        {
+            RuntimeDiagnostics.Write("OrthoModelFilesReadFailed", "WARNING", resultStatus: "ORTHO_MODEL_FILES_API_UNSUPPORTED", exception: exception);
         }
-        catch { }
         return null;
     }
 }
 
+internal static class OrthoModelFilesContract
+{
+    private const string ExpectedViewType = "Autodesk.ProcessPower.Drawings2d.DwgViewDef";
+    private const string ExpectedQueryType = "Autodesk.ProcessPower.Drawings2d.DwgQueryByBox";
+    private const string ExpectedModelFileType = "Autodesk.ProcessPower.Drawings2d.ModelFile";
+    private const string ExpectedDefAssembly = "PnPDwg2dDef";
+    private const string ExpectedUtilAssembly = "PnPDwg2dUtil";
+    private const string ExpectedVersion = "0.0.0.0";
+
+    public static bool IsSupported(IDwgViewDef view, out OrthoModelFilesContractDiagnostic diagnostic)
+    {
+        var query = view.DwgQuery;
+        var files = query?.ModelFiles;
+        var valid = HasExpectedType(view, ExpectedViewType, ExpectedDefAssembly) &&
+                    query is not null && HasExpectedType(query, ExpectedQueryType, ExpectedDefAssembly) &&
+                    files is not null && files.GetType() == typeof(ModelFile[]) &&
+                    files.All(file => file is not null && HasExpectedType(file, ExpectedModelFileType, ExpectedUtilAssembly));
+        diagnostic = new OrthoModelFilesContractDiagnostic(
+            valid ? "ORTHO_MODEL_FILES_API_SUPPORTED" : "ORTHO_MODEL_FILES_API_UNSUPPORTED",
+            new Dictionary<string, object?>
+            {
+                ["ExpectedViewType"] = ExpectedViewType,
+                ["ActualViewType"] = TypeName(view),
+                ["ExpectedQueryType"] = ExpectedQueryType,
+                ["ActualQueryType"] = query is null ? null : TypeName(query),
+                ["ExpectedModelFileType"] = ExpectedModelFileType,
+                ["ActualModelFilesType"] = files?.GetType().AssemblyQualifiedName,
+                ["ExpectedAssemblyVersion"] = ExpectedVersion,
+                ["ActualViewAssemblyVersion"] = view.GetType().Assembly.GetName().Version?.ToString(),
+                ["ActualQueryAssemblyVersion"] = query?.GetType().Assembly.GetName().Version?.ToString(),
+                ["ActualModelFilesAssemblyVersion"] = files?.GetType().Assembly.GetName().Version?.ToString()
+            });
+        return valid;
+    }
+
+    private static bool HasExpectedType(object value, string expectedType, string expectedAssembly) =>
+        string.Equals(value.GetType().FullName, expectedType, StringComparison.Ordinal) &&
+        string.Equals(value.GetType().Assembly.GetName().Name, expectedAssembly, StringComparison.Ordinal) &&
+        string.Equals(value.GetType().Assembly.GetName().Version?.ToString(), ExpectedVersion, StringComparison.Ordinal);
+
+    private static string TypeName(object value) => $"{value.GetType().FullName}, {value.GetType().Assembly.GetName().Name}, {value.GetType().Assembly.GetName().Version}";
+}
+
+internal sealed record OrthoModelFilesContractDiagnostic(string Code, IReadOnlyDictionary<string, object?> Details);
+
 internal sealed class PlantObjectReader : IPlantObjectReader
 {
     public IReadOnlyList<PlantObjectSnapshot> ReadObjects(OrthoViewportInfo viewport, CancellationToken cancellationToken)
     {
-        var document = AcadApplication.DocumentManager.MdiActiveDocument;
+        if (string.IsNullOrWhiteSpace(viewport.SourceDrawingName))
-        if (document is null || string.IsNullOrWhiteSpace(viewport.SourceDrawingName)) return Array.Empty<PlantObjectSnapshot>();
+        {
+            WriteOutcome("ORTHO_SOURCE_DRAWING_NOT_RESOLVED", viewport);
+            return Array.Empty<PlantObjectSnapshot>();
+        }
+
+        PipingProject? pipingProject;
+        try { pipingProject = PlantApplication.ProjectPart("Piping") as PipingProject; }
+        catch (Exception exception)
+        {
+            WriteOutcome("PIPING_PROJECT_PART_NOT_FOUND", viewport, exception);
+            return Array.Empty<PlantObjectSnapshot>();
+        }
+        if (pipingProject is null)
+        {
+            WriteOutcome("PIPING_PROJECT_PART_NOT_FOUND", viewport);
+            return Array.Empty<PlantObjectSnapshot>();
+        }
+
+        var sourceDrawing = ResolveProjectDrawing(pipingProject, viewport.SourceDrawingName);
+        if (sourceDrawing is null) return Array.Empty<PlantObjectSnapshot>();
 
         DataLinksManager? dataLinks;
-        try { dataLinks = PlantApplication.ProjectPart("Piping")?.DataLinksManager; }
+        try { dataLinks = pipingProject.DataLinksManager; }
-        catch { return Array.Empty<PlantObjectSnapshot>(); }
+        catch (Exception exception)
-        if (dataLinks is null) return Array.Empty<PlantObjectSnapshot>();
+        {
-
+            WriteOutcome("SOURCE_DATALINKS_UNAVAILABLE", viewport, exception);
-        if (!Path.IsPathRooted(viewport.SourceDrawingName) || !File.Exists(viewport.SourceDrawingName)) return Array.Empty<PlantObjectSnapshot>();
+            return Array.Empty<PlantObjectSnapshot>();
+        }
+        if (dataLinks is null)
+        {
+            WriteOutcome("SOURCE_DATALINKS_UNAVAILABLE", viewport);
+            return Array.Empty<PlantObjectSnapshot>();
+        }
 
         var snapshots = new List<PlantObjectSnapshot>();
         try
         {
-            using var sourceDatabase = new Database(false, true);
+            // Confirmed Plant 3D 2026 contract: resolve the source model to the
-            sourceDatabase.ReadDwgFile(viewport.SourceDrawingName, FileShare.ReadWrite, true, null);
+            // Piping project drawing record, then read its DataLinks by drawing Id.
-            sourceDatabase.CloseInput(true);
+            // The active Ortho database is deliberately never passed to DataLinks.
-            foreach (var rowId in dataLinks.SelectAcPpRowIds(sourceDatabase))
+            var rowIds = dataLinks.SelectAcPpRowIds(sourceDrawing.Id);
+            if (rowIds.Count == 0)
+            {
+                WriteOutcome("SOURCE_DATALINKS_NO_ROWS", viewport, details: new Dictionary<string, object?> { ["ProjectDrawingResolved"] = true });
+                return Array.Empty<PlantObjectSnapshot>();
+            }
+
+            foreach (var rowId in rowIds)
             {
                 try
                 {
@@ -217,20 +302,78 @@ internal sealed class PlantObjectReader : IPlantObjectReader
                         Diagnostics = new[] { "GEOMETRY_NOT_MAPPED" }
                     });
                 }
-                catch
+                catch (Exception exception)
                 {
-                    // Keep the read path best-effort; no write operation is attempted.
+                    RuntimeDiagnostics.Write("SourceDataLinksRowReadFailed", "WARNING", resultStatus: "SOURCE_DATABASE_READ_FAILED", exception: exception);
                 }
             }
         }
-        catch (DLException)
+        catch (DLException exception)
         {
-            // An Ortho sheet can have no direct Piping DataLinks rows. The caller
+            WriteOutcome("SOURCE_DATALINKS_UNAVAILABLE", viewport, exception);
-            // receives an empty read-only result rather than a command failure.
         }
+        catch (Exception exception)
+        {
+            WriteOutcome("SOURCE_DATABASE_READ_FAILED", viewport, exception);
+        }
+
+        WriteOutcome(snapshots.Count == 0 ? "SOURCE_PIPE_ROWS_NOT_FOUND" : "SOURCE_DATALINKS_READ", viewport,
+            details: new Dictionary<string, object?> { ["SourcePlantObjectsRead"] = snapshots.Count, ["PipeObjectsRead"] = snapshots.Count });
         return snapshots.OrderBy(x => x.SnapshotId, StringComparer.Ordinal).ToArray();
     }
 
+    private static PnPProjectDrawing? ResolveProjectDrawing(PipingProject pipingProject, string sourceDrawingPath)
+    {
+        if (!Path.IsPathRooted(sourceDrawingPath))
+        {
+            WriteOutcome("ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT", null);
+            return null;
+        }
+
+        string normalizedSource;
+        try { normalizedSource = Path.GetFullPath(sourceDrawingPath); }
+        catch (Exception exception)
+        {
+            WriteOutcome("ORTHO_SOURCE_DRAWING_NOT_RESOLVED", null, exception);
+            return null;
+        }
+
+        var matches = pipingProject.GetPnPDrawingFiles()
+            .Where(drawing => MatchesSourcePath(drawing, normalizedSource))
+            .OrderBy(drawing => drawing.Id)
+            .ToArray();
+        if (matches.Length == 1)
+        {
+            RuntimeDiagnostics.Write("SourceProjectDrawingResolved", resultStatus: "SOURCE_FROM_PROJECT_DRAWING_ROW", details: new Dictionary<string, object?> { ["ProjectDrawingResolved"] = true });
+            return matches[0];
+        }
+
+        WriteOutcome(matches.Length == 0 ? "ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT" : "ORTHO_SOURCE_DRAWING_AMBIGUOUS", null,
+            details: new Dictionary<string, object?> { ["CandidateCount"] = matches.Length });
+        return null;
+    }
+
+    private static bool MatchesSourcePath(PnPProjectDrawing drawing, string normalizedSource) =>
+        EquivalentPath(drawing.AbsoluteFileName, normalizedSource) ||
+        EquivalentPath(drawing.ResolvedFilePath, normalizedSource);
+
+    private static bool EquivalentPath(string? candidate, string normalizedSource)
+    {
+        if (string.IsNullOrWhiteSpace(candidate)) return false;
+        try { return string.Equals(Path.GetFullPath(candidate), normalizedSource, StringComparison.OrdinalIgnoreCase); }
+        catch { return false; }
+    }
+
+    private static void WriteOutcome(string code, OrthoViewportInfo? viewport, Exception? exception = null, IReadOnlyDictionary<string, object?>? details = null)
+    {
+        var sanitizedDetails = new Dictionary<string, object?>
+        {
+            ["SourceResolved"] = viewport?.SourceDrawingName is not null
+        };
+        if (details is not null) foreach (var detail in details) sanitizedDetails[detail.Key] = detail.Value;
+        RuntimeDiagnostics.Write("SourceDataLinksReadCompleted", code == "SOURCE_DATALINKS_READ" ? "INFO" : "WARNING", resultStatus: code, exception: exception, details: sanitizedDetails);
+    }
+
     private static string StableId(string drawingName, int rowId, string? className)
     {
         var hash = SHA256.HashData(Encoding.UTF8.GetBytes($"{drawingName}|{rowId}|{className}"));

Plant3D2026/P_Rec_Annot/src/PRecAnnot.Plant3D2026/RuntimeDiagnostics.cs

@@ -14,6 +14,10 @@ internal static class RuntimeDiagnostics
 
     public static string RuntimeMode => Environment.GetEnvironmentVariable("P_REC_ANNOT_RUNTIME_MODE") ?? "Normal";
 
+    public static bool IsOrthoStructureDiagnosticsEnabled =>
+        string.Equals(RuntimeMode, "DryRun", StringComparison.OrdinalIgnoreCase) &&
+        string.Equals(Environment.GetEnvironmentVariable("P_REC_ANNOT_DIAGNOSTICS"), "OrthoStructure", StringComparison.OrdinalIgnoreCase);
+
     public static void Write(
         string eventType,
         string level = "INFO",

Plant3D2026/P_Rec_Annot/tests/PRecAnnot.Core.Tests/FoundationTests.cs

@@ -164,6 +164,51 @@ public sealed class FoundationTests
         Assert.Contains("ORTHO_SOURCE_DRAWING_NOT_RESOLVED", source.EvidenceCodes);
     }
 
+    [Fact] public void DwgQueryContract_UsesConfirmedModelFileContract()
+    {
+        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
+        Assert.Contains("view.DwgQuery?.ModelFiles", source);
+        Assert.Contains("file.ModelFileName", source);
+        Assert.Contains("ORTHO_MODEL_FILES_API_UNSUPPORTED", source);
+    }
+
+    [Fact] public void DwgQueryContract_DoesNotGuessAlternativePropertyNames()
+    {
+        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
+        Assert.DoesNotContain("GetProperty(\"ModelFileName\")", source);
+        Assert.DoesNotContain("GetProperty(\"Value\")", source);
+        Assert.DoesNotContain("GetProperty(\"FileName\")", source);
+    }
+
+    [Fact] public void OrthoSourceReader_UsesResolvedPipingProjectDrawingId()
+    {
+        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
+        Assert.Contains("pipingProject.GetPnPDrawingFiles()", source);
+        Assert.Contains("dataLinks.SelectAcPpRowIds(sourceDrawing.Id)", source);
+    }
+
+    [Fact] public void OrthoSourceReader_DoesNotQueryTheActiveOrthoDatabase()
+    {
+        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
+        Assert.DoesNotContain("SelectAcPpRowIds(sourceDatabase)", source);
+        Assert.DoesNotContain("ReadDwgFile(viewport.SourceDrawingName", source);
+    }
+
+    [Fact] public void OrthoSourceReader_ReportsDistinctSourceDiagnostics()
+    {
+        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "PlantReadPath.cs"));
+        Assert.Contains("ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT", source);
+        Assert.Contains("SOURCE_DATALINKS_UNAVAILABLE", source);
+        Assert.Contains("SOURCE_DATALINKS_NO_ROWS", source);
+    }
+
+    [Fact] public void RuntimeInspector_IsDisabledByDefault()
+    {
+        var source = File.ReadAllText(Path.Combine(ProjectRoot, "src", "PRecAnnot.Plant3D2026", "RuntimeDiagnostics.cs"));
+        Assert.Contains("P_REC_ANNOT_DIAGNOSTICS", source);
+        Assert.Contains("OrthoStructure", source);
+    }
+
     [Fact] public void ApplyMode_IsBlocked() => Assert.Throws<InvalidOperationException>(() => new ExecutionModeWriteGuard(PRecAnnotExecutionMode.Apply).EnsureWriteAllowed("test"));
 
     [Fact] public void DryRunPath_HasNoForWriteOperations()