docs: record source-model DataLinks runtime evidence

Plant3D2026/P_Rec_Annot/AGENTS.md

@@ -63,6 +63,16 @@ DataLinks активного Ortho drawing не являются источни
 rows читаются из source model drawing и Piping project part, разрешённых через
 Ortho sheet/view definitions.
 
+Перед предположениями об Autodesk runtime API необходимо исследовать текущий
+код, доступный legacy usage, assembly metadata и реальные runtime types.
+Reflection/runtime inspection применяется только для подтверждения данных,
+которых нельзя установить статически. Production resolver не угадывает
+Autodesk properties по строковым именам.
+
+Подтверждённый контракт Plant 3D 2026: `IDwgViewDef.DwgQuery` →
+`IDwgQuery.ModelFiles` → `ModelFile[].ModelFileName`. При несовпадении типа
+возвращать `ORTHO_MODEL_FILES_API_UNSUPPORTED`, без fallback-эвристики.
+
 Проверка DCF выполняется на парных `control` и `DryRun` fixtures, созданных из
 одного закрытого состояния проекта. Сравнивать нужно `control delta` с
 `DryRun delta`: одинаковые изменения классифицируются как baseline behavior

Plant3D2026/P_Rec_Annot/docs/evidence/ortho-runtime-summary.json

@@ -6,16 +6,23 @@
   "orthoDetection": "Confirmed",
   "viewportCount": 1,
   "dataLinksAvailable": true,
-  "dataLinksSheetToSourceMapping": "blocked",
+  "dataLinksSheetToSourceMapping": "resolved-through-piping-project-drawing-id",
-  "objectsRead": 0,
+  "sourceDrawingsResolved": 1,
-  "phpRecAnnotRuns": 2,
+  "sourceDataLinksAvailable": true,
-  "pxpAavRuns": 2,
+  "objectsRead": 7,
-  "pxpOaRuns": 1,
+  "pipeObjectsRead": 7,
-  "dbmodBefore": 0,
+  "phpRecAnnotRuns": 1,
-  "dbmodAfter": 0,
+  "pxpAavRuns": null,
+  "pxpOaRuns": null,
+  "planId": null,
+  "repeatedPlanIdEqual": null,
+  "dbmodBefore": null,
+  "dbmodAfter": null,
   "dwgModified": null,
-  "dcfModified": true,
+  "dcfModified": null,
-  "changedProjectFiles": ["Piping.dcf"],
+  "changedProjectFiles": null,
   "unhandledExceptions": 0,
-  "applyModeUsed": false
+  "applyModeUsed": false,
+  "launcherRollback": "RolledBack",
+  "exactViewportMembership": "not-verified"
 }

Plant3D2026/P_Rec_Annot/docs/ortho-runtime-results.md

@@ -10,13 +10,19 @@ viewport. In `DryRun`, `PHP_REC_ANNOT` ran twice, `PXP-AAV` ran twice, and
 `PlantProject.Name` was available for this fixture and rendered as
 `PRecAnnotTestProject`.
 
-The Ortho sheet did not expose direct Piping rows through
+The active Ortho sheet does not expose direct Piping rows and must not be used
-`DataLinksManager.SelectAcPpRowIds`; that API threw `DLException: NotFound`.
+as a DataLinks source. Metadata inspection and a sanitized runtime probe
-The adapter now converts this to an empty read-only result. Consequently the
+confirmed `IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName` as the source-model
-run read zero source Plant objects and produced an empty plan. Mapping the
+reference. The adapter resolves that reference through
-Ortho sheet to source-model objects remains the blocker for non-empty
+`PipingProject.GetPnPDrawingFiles()` and reads
-AnnotationPlan validation.
+`DataLinksManager.SelectAcPpRowIds(PnPProjectDrawing.Id)`.
+
+On the latest real DryRun, one source drawing was resolved and seven source
+Plant objects were read. `PHP_REC_ANNOT` reported seven skipped operations,
+zero writes, zero conflicts, and zero errors. This verifies source-model
+DataLinks access; it does not yet verify exact source-object-to-viewport
+membership or repeated-plan determinism.
 
 The test fixture SHA baseline changed for `Piping.dcf` before the first DryRun
-command. This run therefore does not prove DCF invariance, although no plugin
+command. This run therefore does not prove DCF invariance. A paired control
-write operation was performed and DBMOD remained unchanged.
+fixture versus DryRun fixture comparison remains required.

Plant3D2026/P_Rec_Annot/docs/ortho-source-mapping.md

@@ -0,0 +1,39 @@
+# Ortho source-model mapping
+
+## Confirmed Plant 3D 2026 read path
+
+```text
+Active Ortho document
+→ OrthoProject.DwgSheetDefinitions
+→ IDwgSheetDef.DwgViewDefs
+→ IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName
+→ PipingProject.GetPnPDrawingFiles()
+→ exact normalized-path match to PnPProjectDrawing
+→ PnPProjectDrawing.Id
+→ DataLinksManager.SelectAcPpRowIds(int dwgid)
+→ GetObjectClassname / GetAllProperties
+→ independent PlantObjectSnapshot
+→ AnnotationPlanBuilder
+```
+
+`PlantOrthoViewportReader.ReadViewports` reads the typed DwgQuery contract and
+creates an Ortho viewport snapshot. `PlantObjectReader.ReadObjects` resolves
+the resulting model-file reference through the Piping project drawing list and
+reads DataLinks by project drawing ID. The active Ortho database is not a
+Piping-row source.
+
+All calls are read-only. The adapter opens no write transaction and does not
+save a drawing, DCF, or project metadata.
+
+## Diagnostics
+
+The source reader returns stable telemetry diagnostics rather than suppressing
+the result of a failed query: `ORTHO_SOURCE_DRAWING_NOT_RESOLVED`,
+`ORTHO_SOURCE_DRAWING_NOT_IN_PROJECT`, `ORTHO_SOURCE_DRAWING_AMBIGUOUS`,
+`PIPING_PROJECT_PART_NOT_FOUND`, `SOURCE_DATALINKS_UNAVAILABLE`,
+`SOURCE_DATALINKS_NO_ROWS`, `SOURCE_DATABASE_READ_FAILED`,
+`SOURCE_PIPE_ROWS_NOT_FOUND`, or `SOURCE_DATALINKS_READ`.
+
+Exact membership of a source object in a particular Ortho viewport is not yet
+implemented. A source-level DryRun plan must not be presented as proof of
+viewport membership.

Plant3D2026/P_Rec_Annot/docs/research/dwgquery-model-files-api.md

@@ -0,0 +1,101 @@
+# Plant 3D 2026 DwgQuery / ModelFiles API contract
+
+## Scope and method
+
+This report is based on metadata-only inspection of the installed Plant 3D 2026
+assemblies. The assemblies were read from `<PLANT3D_2026_INSTALL>` and were not
+copied into the repository. Metadata-only inspection was necessary because the
+normal PowerShell host cannot load the product's .NET 8 dependencies safely.
+
+Legacy source at the documented local path was not present on this machine, so
+there is no legacy API claim in this report.
+
+## Confirmed assemblies
+
+| Assembly | Version | Relevant type |
+| --- | --- | --- |
+| `PnPDwg2dDef` | `0.0.0.0` | `Autodesk.ProcessPower.Drawings2d.DwgQuery`, `IDwgQuery`, `DwgViewDef`, `IDwgViewDef`, `DwgSheetDef`, `IDwgSheetDef` |
+| `PnPDwg2dUtil` | `0.0.0.0` | `Autodesk.ProcessPower.Drawings2d.ModelFile` |
+| `PnP3dOrthoProjectPart` | `17.0.60.1` | Ortho project-part integration assembly; the metadata scan found no public DwgQuery declaration there |
+
+`PnPDwg2dDef` and `PnPDwg2dUtil` use `0.0.0.0` assembly versions in the
+installed metadata. The supported runtime contract is therefore identified by
+the exact public type names below, not by an invented product-version number.
+
+## Confirmed contract
+
+```text
+Autodesk.ProcessPower.Drawings2d.IDwgViewDef.DwgQuery
+  : Autodesk.ProcessPower.Drawings2d.IDwgQuery
+
+Autodesk.ProcessPower.Drawings2d.IDwgQuery.ModelFiles
+  : Autodesk.ProcessPower.Drawings2d.ModelFile[]
+
+Autodesk.ProcessPower.Drawings2d.ModelFile.ModelFileName
+  : System.String
+
+Autodesk.ProcessPower.Drawings2d.ModelFile.ModelFileGuid
+  : System.String
+```
+
+`DwgViewDef` implements `IDwgViewDef`; `DwgQuery` implements `IDwgQuery` and
+`IDisposable`; `ModelFile` implements `IComparable<ModelFile>`.
+
+`ModelFiles` is an array, not an untyped enumerable. `ModelFileName` is the
+only confirmed string field representing the model-file reference. `ModelFileGuid`
+is a separate identity field. `IsReferencedDwg` and `Xform` describe reference
+state and transform, not a substitute path.
+
+## Public members relevant to source resolution
+
+`IDwgViewDef` exposes `DwgQuery`, `ViewName`, layout/orientation properties,
+and `SetClippingPlanes`, `SetLayout`, `SetOrientation`, `Erase`, and `New`.
+
+`IDwgQuery` exposes `ModelFiles`, `Execute`, and `Erase`.
+
+`ModelFile` exposes `ModelFileName`, `ModelFileGuid`, `IsReferencedDwg`, and
+`Xform`; its constructors accept a file-name string and optional transform,
+reference flag, and GUID.
+
+`IDwgSheetDef.DwgViewDefs` exposes the view-definition collection. Sheet
+`DwgName`/`DwgPath` identify the Ortho sheet and must not be used as the source
+of Piping DataLinks.
+
+## Current and legacy usage
+
+The original adapter used reflection and tried several possible names
+(`ModelFileName`, `Value`, and arbitrary string values). That was not a valid
+Plant 3D 2026 contract.
+
+The production read path now uses the confirmed typed chain only:
+
+```text
+IDwgViewDef.DwgQuery.ModelFiles[].ModelFileName
+```
+
+The legacy source path was unavailable locally, so no legacy source-model or
+DataLinks workaround has been imported.
+
+## Runtime evidence
+
+Static metadata cannot prove whether `ModelFileName` is project-relative or
+absolute in a concrete Ortho fixture, or whether a particular view has zero,
+one, or multiple model files. In DryRun only, setting
+`P_REC_ANNOT_DIAGNOSTICS=OrthoStructure` enables a sanitized structure probe.
+It records type names, collection counts, null state, string length, and a
+one-way value hash; it does not emit paths or engineering data.
+
+On the local DryRun fixture, the runtime probe recorded one view with one
+`ModelFile`. The concrete types were `DwgViewDef`, `DwgQueryByBox`, and
+`ModelFile[]`; `ModelFileName` was non-null and an absolute fixture-model
+reference. The path itself was not retained in repository evidence.
+
+The resolver resolves that reference to exactly one
+`PipingProject.GetPnPDrawingFiles()` entry by normalized full-path equality,
+then uses the confirmed `DataLinksManager.SelectAcPpRowIds(int dwgid)` overload
+with the resolved `PnPProjectDrawing.Id`. It does not open or query the active
+Ortho database for Piping rows.
+
+The production resolver has no fallback property-name search. If the exact
+contract is unavailable at runtime it reports
+`ORTHO_MODEL_FILES_API_UNSUPPORTED` rather than guessing.